Your car’s handbrake is a obligatory safety feature according to the highway code, in fact , this aims to end your Opel Antara, even on the slight slope. It must be independent of the main brake controls. It is possible that after a while the cable system of the hand brake will loosen up and you will not pass the technical control or you may feel that it is actually no longer blocking your car. To cope with these concerns, we will look at how to adjust the hand brake on your Opel Antara . To accomplish this, first we will see the adjustment of your manual handbrake on Opel Antara , then, in a second step, how to adjust an automatic handbrake, and finally the price of the service performed by a professional.
Adjusting a manual handbrake on Opel Antara?
Thus we start off our document with the hand brake adjustment of a Opel Antara in its manual version. This version works in a basic way having a system of cable and screws that allow you to manage the tension on the device and therefore to modify the stroke on the lever of the handbrake. To act on it you need to act on these kinds of screws to be able to stretch the handbrake cable of the Opel Antara . In any case, before adjusting the hand brake, you must be sure your back wheels aren’t blocked during the adjustment. Make sure you find below the detailed procedure to carry out this kind of intervention:
- At the level of the handbrake, remove the plastic console that covers it using the torx screws and clips.
- Once done, you should see a trapdoor on your handbrake, open it up to see the screw and cable system.
- You will need to locate the locknuts and loosen them with a wrench tool to allow you to replace the cable tension.
- Now screw on the lock nuts upon both sides, make sure you make the exact changes upon both sides to hold a balanced brake, and be sure the hand brake lever of your Opel Antara has a stroke of about 3 notches.
- Tighten the locknuts and check the locking of the rims of your car, if it’s great you can reassemble the set, otherwise tighten again the tightening screws until you get a great optimal setting
.
If you don’t have access to the handbrake flap of the Opel Antara, the adjustment will be exactly the same however it will be done by passing beneath your car in the level of the handbrake lever. Be sure to set your car on the stand before any actions.
How do I adjust the automatic handbrake of my personal Opel Antara?
Second system of handbrake adjustment upon Opel Antara , this is an automatic handbrake, unlike the manual one, this one is done on the brake drums or calipers, and it is expected to adjust automatically for the wear of the brake shoes or disc brake pads. It may be that if you shortly have to buy brake pads, the handbrake will suffer power, allow me to share the steps for taking to check if the tension of your handbrake is the right one:
- Realize that an automatic handbrake can not be modified directly because it is likely to adapt by itself to the use of the disc brake pads or pads of your Opel Antara.
- You can nonetheless check that the system is functioning effectively by simply putting the car on the stand and checking by driving under the automobile that the brake pads are still in good performing order.
- For drum brakes it will be necessary to take apart the tires to check the state of the shoes, all of us encourage you to have it performed by a professional.
- Make sure to replace your disc brake pads if you need to.
What is the price of adjusting the handbrake of Opel Antara by a professional?
Finally, if you do not feel comfortable with this procedure, especially since it concerns a security component of your car, namely the adjustment on the handbrake of the Opel Antara , we inform you to go to a technician that can adjust the handbrake for a about fifty local currency . If you have problems with vibrations when braking on Opel Antara, do not wait to consult our document which works with this problem.
If you need more tutorials on the Opel Antara, go to our Opel Antara category.
