Your car’s handbrake is a required security feature according to the highway code, in fact , this aims to quit your Nissan Xterra, even over a slight incline. It must be in addition to the main brake controls. It will be possible that over time the cable system of the hand brake will loosen up and you will certainly not pass the technical control or you may well feel that it truly is no longer blocking your car. To cope with these problems, we will look at how to adjust the hand brake on your Nissan Xterra . To accomplish this, first we will see the adjustment of a manual handbrake on Nissan Xterra , in that case, in a second step, how to adjust an automatic handbrake, and ultimately the price of the service performed by a professional.
Adjusting a manual handbrake on Nissan Xterra?
So we begin our document with the hand brake adjustment of a Nissan Xterra in its manual version. This version performs in a basic way having a system of cable and screws that allow you to control the tension on the device and thus to modify the stroke on the lever of the handbrake. To act on it you need to act on these kinds of screws in order to stretch out the handbrake cable of the Nissan Xterra . In any case, before adjusting the hand brake, you must be sure your back wheels are not blocked during the adjustment. Please find below the detailed method to carry out this intervention:
- In the level of the handbrake, remove the plastic console that protects it using the torx screws and clips.
- Once completed, you should see a trapdoor in your handbrake, open it to see the screw and cable system.
- You will have to locate the locknuts and loosen them with a wrench tool to allow you to replace the cable stress.
- Now screw on the locking mechanism nuts in both sides, be sure to make the same changes on both sides to hold a balanced brake, and be sure the hand brake handle of your Nissan Xterra has a stroke of about three notches.
- Tighten the locknuts and test the locking of the rims of your car, if it’s very good you can reassemble the set, otherwise tighten again the tightening screws until you get a great optimal configuration
.
If you don’t have access to the handbrake flap of the Nissan Xterra, the adjustment will be precisely the same but it surely will be done by passing underneath your car on the level of the handbrake handle. Make sure you put your car on the stand before any action.
How do I adjust the automatic handbrake of my Nissan Xterra?
Second approach to handbrake adjustment in Nissan Xterra , this is an automatic handbrake, not like the manual one, this one is done upon the brake drums or perhaps calipers, and it is imagined to adjust automatically for the wear of the brake shoes or pads. It may be that if you shortly have to buy brake pads, the handbrake will suffer power, here are the steps to consider to examine if the strain of your handbrake is the right one:
- Be aware that an automatic handbrake cannot be adjusted straight because it is likely to adapt by itself to the don of the pads or pads of your Nissan Xterra.
- You can still examine that the system is working correctly by simply putting the vehicle on the stand and looking at by driving under the motor vehicle that the disc brake pads are still in good performing order.
- For drum brakes it can be necessary to take apart the tires to examine your the shoes, all of us advise you to have it completed by a professional.
- Be sure you change your pads if you need to.
What is the cost of adjusting the handbrake of Nissan Xterra by a professional?
Finally, if you do not feel comfortable with this procedure, specifically since it questions a security component of your car, namely the adjustment on the handbrake of the Nissan Xterra , we advise you to go to a auto technician that can adjust the handbrake for the about fifty euros . For those who have problems with vibrations when braking on Nissan Xterra, do not think twice to consult our document which relates to this issue.
To discover more tips on the Nissan Xterra, take a look at the Nissan Xterra category.
