Your car’s handbrake is a obligatory protection feature according to the highway code, in fact , this aims to stop your Nissan Cube, even over a slight incline. It must be in addition to the main brake system controls. It is also possible that after some time the cable system of the hand brake will loosen up and you will certainly not pass the technical control or you may well feel that it really is no longer stopping your car. To address these concerns, we will look at how to adjust the hand brake on your Nissan Cube . To do this, first we will see the adjustment of your manual handbrake on Nissan Cube , after that, in a second step, how to adjust an automatic handbrake, and finally the price of the service performed by a professional.
Adjusting a manual handbrake on Nissan Cube?
So we start off our content with the hand brake adjustment of a Nissan Cube in its manual version. This kind of version performs in a simple way using a system of cable and anchoring screws that allow you to manage the tension in the device and therefore to modify the stroke in the lever of the handbrake. To act on it you should act on these kinds of screws in order to extend the handbrake cable of the Nissan Cube . In any case, just before adjusting the hand brake, you must check that your back wheels are not blocked through the adjustment. Make sure you find below the detailed procedure to carry out this intervention:
- In the level of the handbrake, remove the plastic console that covers it using the torx screws and clips.
- Once carried out, you should find out a trapdoor in your handbrake, open it to see the screw and cable system.
- You will have to locate the locknuts and loosen them with a wrench to allow you to replace the cable tension.
- Now screw on the lock nuts in both sides, make sure to make the exact changes on both sides to keep a balanced brake, and check that the hand brake lever of your Nissan Cube has a stroke of about three notches.
- Tighten the locknuts and test out the locking of the rims of your car, if it’s good you can reassemble the set, otherwise tighten up again the tightening anchoring screws until you get a great optimum setting
.
If you don’t have access to the handbrake flap of the Nissan Cube, the adjustment will be precisely the same but it surely will be done by passing below your car with the level of the handbrake lever. Make sure you set your car on the stand just before any actions.
How do I adjust the automatic handbrake of my personal Nissan Cube?
Second system of handbrake adjustment in Nissan Cube , this is an automatic handbrake, unlike the manual one, this is done on the brake drums or calipers, and it is expected to change automatically for the wear of the brake shoes or disc brake pads. It may be that if you shortly have to buy brake pads, the handbrake will lose power, here are the steps to take to examine if the strain of your handbrake is the right one:
- Remember that an automatic handbrake can’t be modified straight because it is supposed to adapt on its own to the put on of the disc brake pads or shoes of your Nissan Cube.
- You can nonetheless examine that the system is functioning effectively by simply putting your vehicle on the stand and examining by driving under the car that the pads are still in good performing order.
- For drum brakes it can be required to disassemble the brakes to examine the state of the shoes, we all encourage you to have it completed by a specialist.
- Make sure to replace your disc brake pads if you need to.
What is the cost of adjusting the handbrake of Nissan Cube by a specialist?
Finally, if you do not feel comfortable with this procedure, especially since it fears a safety component of your car, namely the adjustment in the handbrake of the Nissan Cube , we inform you to go to a repair shop who are able to adjust the handbrake for the about fifty euros . For those who have problems with vibrations when braking on Nissan Cube, do not hesitate to refer to our content which deals with this problem.
To get more tips on the Nissan Cube, take a look at the Nissan Cube category.
