Your car’s handbrake is actually a mandatory security feature based on the highway code, in fact , it aims to end your Mazda CX 5, even on the slight slope. It must be independent of the main brake controls. It is possible that after a while the wire system of the hand brake will loosen up and you will not really pass the technical control or you may possibly feel that it can be no longer blocking your car. To deal with these concerns, we will look at how to adjust the hand brake on your Mazda CX 5 . To get this done, first we will see the adjustment of the manual handbrake on Mazda CX 5 , then, in a second step, how to adjust an automatic handbrake, and ultimately the price of the service performed by a professional.
Adjusting a manual handbrake on Mazda CX 5?
So we start off our article with the hand brake adjustment of a Mazda CX 5 in its manual version. This kind of version performs in a basic way having a system of wire and screws that allow you to manage the tension from the device and therefore to modify the stroke from the lever of the handbrake. To act on it you need to act on these types of screws to be able to expand the handbrake cable of the Mazda CX 5 . In any case, prior to adjusting the hand brake, you must be sure your rear wheels aren’t blocked during the adjustment. Please find below the detailed technique to carry out this kind of intervention:
- On the level of the handbrake, remove the plastic console that protects it using the torx screws and clips.
- Once completed, you should find out a trapdoor on your handbrake, open it up to see the screw and wire system.
- You will need to locate the locknuts and loosen them with a wrench tool to allow you to replace the cable stress.
- Now screw on the locking mechanism nuts in both sides, be sure to make the exact changes on both sides to keep a balanced brake, and be sure the hand brake lever of your Mazda CX 5 has a stroke of about 3 notches.
- Tighten the locknuts and test out the fastening of the tires of your car, if it’s great you can reassemble the set, otherwise tighten again the tightening screws until you get an optimal setting
.
If you don’t have access to the handbrake flap of the Mazda CX 5, the adjustment will be exactly the same nonetheless it will be done by passing below your car on the level of the handbrake lever. Make sure place your car on the stand prior to any actions.
How do I adjust the automatic handbrake of my own Mazda CX 5?
Second system of handbrake adjustment in Mazda CX 5 , this is an automatic handbrake, unlike the manual one, this place is done upon the brake drums or calipers, which is designed to change automatically for the wear of the brake shoes or disc brake pads. It may be that if you quickly have to acquire brake pads, the handbrake will lose power, listed below are the steps to take to verify if the tension of your handbrake is the appropriate one:
- Be aware that an automatic handbrake can’t be adjusted straight because it is designed to adapt by itself to the wear of the disc brake pads or pads of your Mazda CX 5.
- You can still verify that the system is operating properly simply by putting your vehicle on the stand and verifying by driving under the car that the brake pads are still in good working order.
- For drum brakes it will be necessary to disassemble the brake systems to verify the state of the shoes, all of us advise you to have it done by a specialist.
- Remember to change your disc brake pads if you need to.
What is the cost of adjusting the handbrake of Mazda CX 5 by a specialist?
Finally, if you do not feel comfortable with this procedure, especially since it worries a safety element of your car, namely the adjustment from the handbrake of the Mazda CX 5 , we give you advice to go to a auto technician that can adjust the handbrake for the about fifty euros . When you have problems with vibrations when braking on Mazda CX 5, do not think twice to consult our article which relates to this issue.
To get more tips on the Mazda CX 5, take a look at the Mazda CX 5 category.
