Your car’s handbrake is a obligatory security feature according to the highway code, in fact , this aims to end your Lexus GS, even on a slight slope. It must be in addition to the main brake system controls. It is possible that over time the wire system of the hand brake will loosen up and you will not pass the technical control or you might feel that it is no longer stopping your car. To deal with these challenges, we will look at how to adjust the hand brake on your Lexus GS . To accomplish this, first we will see the adjustment of your manual handbrake on Lexus GS , after that, in a second step, how to adjust an automatic handbrake, and finally the price of the service performed by a professional.
Adjusting a manual handbrake on Lexus GS?
So we begin our article with the hand brake adjustment of a Lexus GS in its manual version. This kind of version works in a basic way which has a system of wire and anchoring screws that allow you to control the tension of the device and therefore to modify the stroke of the lever of your handbrake. To act on it you will have to act on these screws to be able to expand the handbrake cable of your Lexus GS . In any case, prior to adjusting the hand brake, you must check that your rear wheels aren’t blocked through the adjustment. Please find under the detailed technique to carry out this intervention:
- In the level of the handbrake, remove the plastic console that covers it using the torx screws and clips.
- Once carried out, you should discover a trapdoor in your handbrake, open it to see the screw and wire system.
- You need to locate the locknuts and loosen them with a wrench tool to allow you to replace the cable tension.
- Now screw on the lock nuts upon both sides, make sure to make the same changes on both sides to keep a balanced brake, and check that the hand brake lever of your Lexus GS has a stroke of about three notches.
- Tighten the locknuts and test the fastening of the rims of your car, if it’s great you can reassemble the set, otherwise tighten again the tightening anchoring screws until you get an optimum setting
.
If you don’t have access to the handbrake flap of your Lexus GS, the adjustment will probably be precisely the same but it will be done by passing below your car on the level of the handbrake lever. Make sure you place your car on the stand prior to any actions.
How do I adjust the automatic handbrake of my Lexus GS?
Second approach to handbrake adjustment upon Lexus GS , this is an automatic handbrake, in contrast to the manual one, this one is done upon the brake drums or perhaps calipers, which is supposed to change automatically towards the wear of your brake shoes or pads. It may be that if you shortly have to purchase brake pads, the handbrake will lose power, here are the steps to consider to verify if the strain of your handbrake is the appropriate one:
- Realize that an automatic handbrake can’t be modified directly because it is likely to adapt alone to the put on of the pads or shoes of your Lexus GS.
- You can still verify that the system is operating correctly simply by putting your vehicle on the stand and looking at by driving under the car that the disc brake pads are still in good performing order.
- For drum brakes it will probably be necessary to take apart the brake systems to verify your the shoes, we all encourage you to have it conducted by a specialist.
- Make sure to replace your pads if you need to.
What is the price of adjusting the handbrake of Lexus GS by a specialist?
Finally, if you do not feel comfortable with this procedure, especially since it questions a security element of your car, namely the adjustment of the handbrake of your Lexus GS , we counsel you to go to a auto technician who are able to adjust the handbrake for the about fifty euros . In case you have problems with vibrations when braking on Lexus GS, do not wait to consult our article which deals with this trouble.
If you want more tutorials on the Lexus GS, go to our Lexus GS category.
