Your car’s handbrake is actually a required safety feature based on the highway code, in fact , this aims to stop your Hyundai Bayon, even on the slight incline. It must be in addition to the main brake system controls. It is possible that as time passes the cable system of the hand brake will loosen up and you will not pass the technical control or you could feel that it can be no longer stopping your car. To cope with these concerns, we will look at how to adjust the hand brake on your Hyundai Bayon . To do this, first we will see the adjustment of your manual handbrake on Hyundai Bayon , then simply, in a second step, how to adjust an automatic handbrake, and finally the price of the service performed by a professional.
Adjusting a manual handbrake on Hyundai Bayon?
Thus we start our document with the hand brake adjustment of a Hyundai Bayon in its manual version. This kind of version works in a simple way having a system of cable and screws that allow you to control the tension on the device and so to modify the stroke on the lever of the handbrake. To act on it you need to act on these kinds of screws to be able to extend the handbrake cable of the Hyundai Bayon . In any case, ahead of adjusting the hand brake, you must make sure that your back wheels are certainly not blocked through the adjustment. Make sure you find under the detailed process to carry out this intervention:
- With the level of the handbrake, remove the plastic console that covers it using the torx screws and clips.
- Once completed, you should discover a trapdoor in your handbrake, open it to see the screw and cable system.
- You will have to locate the locknuts and loosen them with a wrench to allow you to change the cable tension.
- Now screw on the locking mechanism nuts in both sides, ensure that you make the exact changes on both sides to hold a balanced brake, and make sure that the hand brake lever of your Hyundai Bayon has a stroke of about three notches.
- Tighten the locknuts and test out the fastening of the rims of your car, if it’s very good you can reassemble the set, otherwise tighten again the tightening screws until you get an ideal setting
.
If you don’t have access to the handbrake flap of the Hyundai Bayon, the adjustment will probably be exactly the same however it will be done by passing below your car at the level of the handbrake lever. Be sure to place your car on the stand ahead of any action.
How do I adjust the automatic handbrake of my Hyundai Bayon?
Second system of handbrake adjustment in Hyundai Bayon , this is an automatic handbrake, as opposed to the manual one, this one is done upon the brake drums or calipers, and is also expected to adjust automatically towards the wear of the brake shoes or pads. It may be that if you quickly have to get brake pads, the handbrake will lose power, here are the steps to take to check if the strain of your handbrake is the appropriate one:
- Realize that an automatic handbrake can not be modified straight because it is meant to adapt alone to the have on of the pads or pads of your Hyundai Bayon.
- You can even now check that the system is functioning correctly by putting the vehicle on the stand and verifying by driving under the vehicle that the brake pads are still in good working order.
- For drum brakes will probably be required to take apart the tires to check the state of the shoes, we advise you to have it carried out by a specialist.
- Make sure to replace your pads if you need to.
What is the price of adjusting the handbrake of Hyundai Bayon by a specialist?
Finally, if you do not feel comfortable with this procedure, especially since it questions a security component of your car, namely the adjustment on the handbrake of the Hyundai Bayon , we advise you to go to a repair shop who are able to adjust the handbrake for the about fifty euros . For those who have problems with vibrations when braking on Hyundai Bayon, do not think twice to consult our document which works with this issue.
If you wish more guides on the Hyundai Bayon, go to our Hyundai Bayon category.
