Your car’s handbrake is a obligatory basic safety feature according to the highway code, in fact , this aims to stop your GMC Yukon, even over a slight slope. It must be independent of the main brake system controls. It is also possible that over time the cable system of the hand brake will relax and you will not really pass the technical control or you could feel that it is no longer blocking your car. To address these complications, we will look at how to adjust the hand brake on your GMC Yukon . To achieve this, first we will see the adjustment of your manual handbrake on GMC Yukon , after that, in a second step, how to adjust an automatic handbrake, and then the price of the service performed by a professional.
Adjusting a manual handbrake on GMC Yukon?
So we begin our article with the hand brake adjustment of a GMC Yukon in its manual version. This kind of version works in a simple way with a system of cable and screws that allow you to control the tension from the device and so to modify the stroke from the lever of your handbrake. To act on it you should act on these kinds of screws in order to stretch out the handbrake cable of your GMC Yukon . In any case, before adjusting the hand brake, you must be sure your rear wheels are certainly not blocked during the adjustment. Please find under the detailed procedure to carry out this kind of intervention:
- In the level of your handbrake, remove the plastic console that protects it using the torx screws and clips.
- Once performed, you should discover a trapdoor in your handbrake, open it up to see the screw and cable system.
- You need to locate the locknuts and loosen them with a wrench tool to allow you to replace the cable pressure.
- Now screw on the locking mechanism nuts on both sides, make certain to make the exact changes upon both sides to hold a balanced braking, and be sure the hand brake lever of your GMC Yukon has a stroke of about 3 notches.
- Tighten the locknuts and check the locking of the wheels of your car, if it’s great you can reassemble the set, otherwise tighten up again the tightening screws until you get a great ideal setting
.
If you don’t have access to the handbrake flap of your GMC Yukon, the adjustment will probably be exactly the same but it surely will be done by passing beneath your car with the level of your handbrake lever. Make sure set your car on the stand before any action.
How do I adjust the automatic handbrake of my GMC Yukon?
Second system of handbrake adjustment on GMC Yukon , this is an automatic handbrake, unlike the manual one, that one is done upon the brake drums or perhaps calipers, and is expected to adjust automatically towards the wear of your brake shoes or brake pads. It may be that if you quickly have to get brake pads, your handbrake will lose power, allow me to share the steps to take to check if the strain of your handbrake is the right one:
- Remember that an automatic handbrake can’t be adjusted straight because it is meant to adapt itself to the put on of the brake pads or shoes of your GMC Yukon.
- You can still check that the system is operating properly simply by putting the vehicle on the stand and examining by driving under the auto that the pads are still in good functioning order.
- For drum brakes it can be required to disassemble the brakes to check the state of the shoes, we advise you to have it conducted by a professional.
- Make sure to replace your brake pads if you need to.
What is the cost of adjusting the handbrake of GMC Yukon by a professional?
Finally, if you do not feel comfortable with this procedure, specifically since it issues a safety element of your car, namely the adjustment from the handbrake of your GMC Yukon , we advise you to go to a technician who are able to adjust your handbrake for your about fifty local currency . In case you have problems with vibrations when braking on GMC Yukon, do not hesitate to consult our article which relates to this trouble.
If you need more tutorials on the GMC Yukon, go to our GMC Yukon category.
