Your car’s handbrake is a required safety feature according to the highway code, in fact , it aims to quit your Ford Taurus, even on the slight incline. It must be independent of the main brake controls. It will be possible that after some time the wire system of the hand brake will relax and you will certainly not pass the technical control or you could feel that it is actually no longer blocking your car. To address these problems, we will look at how to adjust the hand brake on your Ford Taurus . To do this, first we will see the adjustment of the manual handbrake on Ford Taurus , then, in a second step, how to adjust an automatic handbrake, and ultimately the price of the service performed by a professional.
Adjusting a manual handbrake on Ford Taurus?
So we start our content with the hand brake adjustment of a Ford Taurus in its manual version. This kind of version works in a simple way with a system of wire and anchoring screws that allow you to manage the tension in the device and therefore to modify the stroke in the lever of your handbrake. To act on it you must act on these types of screws in order to stretch out the handbrake cable of your Ford Taurus . In any case, ahead of adjusting the hand brake, you must check that your back wheels aren’t blocked during the adjustment. Please find under the detailed technique to carry out this intervention:
- With the level of the handbrake, remove the plastic console that covers it using the torx screws and clips.
- Once completed, you should find out a trapdoor on your handbrake, open it up to see the screw and wire system.
- You need to locate the locknuts and loosen them with a wrench to allow you to change the cable pressure.
- Now screw on the lock nuts on both sides, make sure you make the same changes on both sides to keep a balanced brake, and check that the hand brake handle of your Ford Taurus has a stroke of about 3 notches.
- Tighten the locknuts and test out the fastening of the tires of your car, if it’s good you can reassemble the set, otherwise tighten again the tightening anchoring screws until you get an optimum configuration
.
If you don’t have access to the handbrake flap of your Ford Taurus, the adjustment will probably be exactly the same however it will be done by passing directly below your car on the level of the handbrake handle. Remember to place your car on the stand ahead of any action.
How do I adjust the automatic handbrake of my personal Ford Taurus?
Second system of handbrake adjustment on Ford Taurus , this is an automatic handbrake, in contrast to the manual one, that one is done upon the brake drums or calipers, and it is meant to change automatically for the wear of your brake shoes or pads. It may be that if you before long have to get brake pads, the handbrake will lose power, here are the steps for taking to check if the tension of your handbrake is the appropriate one:
- Be aware that an automatic handbrake can’t be modified straight because it is purported to adapt itself to the wear of the pads or pads of your Ford Taurus.
- You can nonetheless check that the system is working properly by simply putting the vehicle on the stand and examining by driving under the auto that the pads are still in good functioning order.
- For drum brakes it is required to disassemble the brakes to check the state of the shoes, we advise you to have it performed by a professional.
- Remember to change your pads if you need to.
What is the cost of adjusting the handbrake of Ford Taurus by a professional?
Finally, if you do not feel comfortable with this procedure, especially since it concerns a security component of your car, namely the adjustment in the handbrake of your Ford Taurus , we give you advice to go to a technician who are able to adjust the handbrake for your about fifty local currency . When you have problems with vibrations when braking on Ford Taurus, do not wait to refer to our content which works with this issue.
To discover more tips on the Ford Taurus, take a look at the Ford Taurus category.
