Your car’s handbrake is a mandatory basic safety feature based on the highway code, in fact , it aims to quit your Ford Fusion, even on the slight incline. It must be independent of the main brake controls. It is possible that with time the cable system of the hand brake will relax and you will not pass the technical control or you could feel that it truly is no longer blocking your car. To address these challenges, we will look at how to adjust the hand brake on your Ford Fusion . To get this done, first we will see the adjustment of your manual handbrake on Ford Fusion , after that, in a second step, how to adjust an automatic handbrake, and then finally the price of the service performed by a professional.
Adjusting a manual handbrake on Ford Fusion?
So we begin our document with the hand brake adjustment of a Ford Fusion in its manual version. This kind of version works in a simple way which has a system of cable and screws that allow you to manage the tension from the device and therefore to modify the stroke from the lever of your handbrake. To act on it you should act on these kinds of screws in order to extend the handbrake cable of your Ford Fusion . In any case, before adjusting the hand brake, you must check that your rear wheels are not blocked throughout the adjustment. Please find below the detailed procedure to carry out this kind of intervention:
- In the level of the handbrake, remove the plastic console that covers it using the torx screws and clips.
- Once performed, you should discover a trapdoor on your handbrake, open it up to see the screw and cable system.
- You will need to locate the locknuts and loosen them with a wrench to allow you to replace the cable pressure.
- Now screw on the locking mechanism nuts on both sides, be sure to make the exact changes on both sides to hold a balanced braking, and check that the hand brake lever of your Ford Fusion has a stroke of about three notches.
- Tighten up the locknuts and test the locking of the rims of your car, if it’s very good you can reassemble the set, otherwise tighten again the tightening screws until you get a great optimum setting
.
If you don’t have access to the handbrake flap of your Ford Fusion, the adjustment will probably be precisely the same but it really will be done by passing underneath your car with the level of the handbrake lever. Remember to set your car on the stand before any actions.
How do I adjust the automatic handbrake of my own Ford Fusion?
Second system of handbrake adjustment on Ford Fusion , this is an automatic handbrake, in contrast to the manual one, this one is done directly on the brake drums or calipers, and is also meant to change automatically to the wear of your brake shoes or pads. It may be that if you before long have to buy brake pads, the handbrake will lose power, here are the steps for taking to examine if the strain of your handbrake is the right one:
- Bear in mind that an automatic handbrake can’t be modified directly because it is meant to adapt themselves to the use of the pads or shoes of your Ford Fusion.
- You can even now examine that the system is operating correctly by simply putting your vehicle on the stand and checking out by driving under the car that the brake pads are still in good working order.
- For drum brakes it can be necessary to disassemble the tires to examine the state of the shoes, we advise you to have it carried out by a professional.
- Make sure to replace your pads if you need to.
What is the price of adjusting the handbrake of Ford Fusion by a professional?
Finally, if you do not feel comfortable with this procedure, specifically since it fears a security element of your car, namely the adjustment from the handbrake of your Ford Fusion , we advise you to go to a auto technician who can adjust the handbrake for the about fifty euros . In case you have problems with vibrations when braking on Ford Fusion, do not think twice to refer to our document which works with this trouble.
If you wish more tutorials on the Ford Fusion, go to our Ford Fusion category.
