Your car’s handbrake is a obligatory security feature according to the highway code, in fact , it aims to quit your Ford F 250, even on the slight incline. It must be in addition to the main brake system controls. It is possible that over time the wire system of the hand brake will loosen up and you will not pass the technical control or you may feel that it really is no longer blocking your car. To cope with these concerns, we will look at how to adjust the hand brake on your Ford F 250 . To do this, first we will see the adjustment of a manual handbrake on Ford F 250 , then simply, in a second step, how to adjust an automatic handbrake, and ultimately the price of the service performed by a professional.
Adjusting a manual handbrake on Ford F 250?
Thus we commence our content with the hand brake adjustment of a Ford F 250 in its manual version. This version performs in a basic way using a system of wire and screws that allow you to manage the tension of the device and therefore to modify the stroke of the lever of your handbrake. To act on it you must act on these kinds of screws to be able to stretch out the handbrake cable of your Ford F 250 . In any case, just before adjusting the hand brake, you must check that your rear wheels are certainly not blocked during the adjustment. Make sure you find under the detailed treatment to carry out this intervention:
- In the level of the handbrake, remove the plastic console that protects it using the torx screws and clips.
- Once completed, you should find out a trapdoor on your handbrake, open it up to see the screw and wire system.
- You will have to locate the locknuts and loosen them with a wrench to allow you to change the cable tension.
- Now screw on the locking mechanism nuts in both sides, make sure you make the exact changes on both sides to keep a balanced brake, and check that the hand brake lever of your Ford F 250 has a stroke of about 3 notches.
- Tighten the locknuts and test the fastening of the rims of your car, if it’s great you can reassemble the set, otherwise tighten up again the tightening screws until you get an optimum configuration
.
If you don’t have access to the handbrake flap of your Ford F 250, the adjustment will probably be precisely the same nonetheless it will be done by passing below your car with the level of the handbrake lever. Remember to set your car on the stand just before any action.
How do I adjust the automatic handbrake of my own Ford F 250?
Second system of handbrake adjustment in Ford F 250 , this is an automatic handbrake, not like the manual one, this is done directly on the brake drums or calipers, and is imagined to change automatically for the wear of your brake shoes or disc brake pads. It may be that if you shortly have to get brake pads, the handbrake will lose power, here are the steps to consider to examine if the strain of your handbrake is the right one:
- Take note that an automatic handbrake cannot be adjusted directly because it is designed to adapt alone to the put on of the disc brake pads or shoes of your Ford F 250.
- You can even now examine that the system is operating correctly by putting the automobile on the stand and looking at by driving under the motor vehicle that the pads are still in good performing order.
- For drum brakes it can be required to disassemble the brakes to examine your the shoes, we recommend you to have it done by a specialist.
- Be sure you replace your disc brake pads if you need to.
What is the cost of adjusting the handbrake of Ford F 250 by a specialist?
Finally, if you do not feel comfortable with this procedure, specifically since it worries a safety component of your car, namely the adjustment of the handbrake of your Ford F 250 , we give you advice to go to a auto technician who can adjust the handbrake for the about fifty euros . In case you have problems with vibrations when braking on Ford F 250, do not hesitate to refer to our content which deals with this trouble.
To get more tips on the Ford F 250, take a look at the Ford F 250 category.
