Your car’s handbrake is actually a mandatory protection feature based on the highway code, in fact , it aims to end your Ford C Max, even on the slight slope. It must be in addition to the main brake controls. It is possible that over time the cable system of the hand brake will relax and you will certainly not pass the technical control or you may possibly feel that it is no longer stopping your car. To cope with these problems, we will look at how to adjust the hand brake on your Ford C Max . To do this, first we will see the adjustment of a manual handbrake on Ford C Max , after that, in a second step, how to adjust an automatic handbrake, and lastly the price of the service performed by a professional.
Adjusting a manual handbrake on Ford C Max?
Therefore we start our document with the hand brake adjustment of a Ford C Max in its manual version. This version works in a simple way using a system of cable and screws that allow you to manage the tension on the device and therefore to modify the stroke on the lever of the handbrake. To act on it you must act on these screws to be able to expand the handbrake cable of the Ford C Max . In any case, just before adjusting the hand brake, you must check that your rear end wheels are not blocked during the adjustment. Make sure you find below the detailed process to carry out this intervention:
- On the level of the handbrake, remove the plastic console that covers it using the torx screws and clips.
- Once performed, you should see a trapdoor on your handbrake, open it up to see the screw and cable system.
- You will have to locate the locknuts and loosen them with a wrench tool to allow you to replace the cable pressure.
- Now screw on the locking mechanism nuts in both sides, be sure to make the same changes upon both sides to hold a balanced brake, and check that the hand brake handle of your Ford C Max has a stroke of about 3 notches.
- Tighten up the locknuts and check the fastening of the wheels of your car, if it’s great you can reassemble the set, otherwise tighten again the tightening screws until you get a great optimum setting
.
If you don’t have access to the handbrake flap of the Ford C Max, the adjustment will be exactly the same but it surely will be done by passing underneath your car in the level of the handbrake handle. Make sure you place your car on the stand just before any actions.
How do I adjust the automatic handbrake of my personal Ford C Max?
Second system of handbrake adjustment in Ford C Max , this is an automatic handbrake, unlike the manual one, this one is done directly on the brake drums or perhaps calipers, and it is imagined to change automatically to the wear of the brake shoes or brake pads. It may be that if you rapidly have to acquire brake pads, the handbrake will suffer power, allow me to share the steps to consider to check if the strain of your handbrake is the right one:
- Realize that an automatic handbrake can not be adjusted straight because it is supposed to adapt on its own to the put on of the brake pads or shoes of your Ford C Max.
- You can even now check that the system is functioning effectively by putting the automobile on the stand and checking by driving under the vehicle that the disc brake pads are still in good performing order.
- For drum brakes it is necessary to disassemble the brake systems to check your the shoes, all of us recommend you to have it done by a specialist.
- Remember to change your brake pads if you need to.
What is the price of adjusting the handbrake of Ford C Max by a specialist?
Finally, if you do not feel comfortable with this procedure, especially since it concerns a security element of your car, namely the adjustment on the handbrake of the Ford C Max , we give you advice to go to a repair shop who can adjust the handbrake to get a about fifty local currency . When you have problems with vibrations when braking on Ford C Max, do not think twice to refer to our document which works with this issue.
To get more tips on the Ford C Max, take a look at the Ford C Max category.
