Your car’s handbrake is actually a mandatory protection feature based on the highway code, in fact , it aims to quit your Fiat Panda, even on the slight incline. It must be independent of the main brake system controls. It is also possible that over time the cable system of the hand brake will loosen up and you will not pass the technical control or you could feel that it is no longer stopping your car. To deal with these concerns, we will look at how to adjust the hand brake on your Fiat Panda . To get this done, first we will see the adjustment of a manual handbrake on Fiat Panda , in that case, in a second step, how to adjust an automatic handbrake, and finally the price of the service performed by a professional.
Adjusting a manual handbrake on Fiat Panda?
Therefore we commence our content with the hand brake adjustment of a Fiat Panda in its manual version. This version performs in a basic way which has a system of cable and anchoring screws that allow you to manage the tension of the device and thus to modify the stroke of the lever of your handbrake. To act on it you must act on these screws in order to expand the handbrake cable of your Fiat Panda . In any case, prior to adjusting the hand brake, you must make sure that your rear wheels aren’t blocked during the adjustment. Please find below the detailed procedure to carry out this intervention:
- With the level of your handbrake, remove the plastic console that covers it using the torx screws and clips.
- Once carried out, you should see a trapdoor on your handbrake, open it to see the screw and cable system.
- You need to locate the locknuts and loosen them with a wrench to allow you to change the cable tension.
- Now screw on the lock nuts upon both sides, make sure to make the comparable changes on both sides to keep a balanced brake, and make sure that the hand brake handle of your Fiat Panda has a stroke of about 3 notches.
- Tighten the locknuts and test the fastening of the wheels of your car, if it’s good you can reassemble the set, otherwise tighten up again the tightening anchoring screws until you get an ideal configuration
.
If you don’t have access to the handbrake flap of your Fiat Panda, the adjustment will be precisely the same but it will be done by passing beneath your car with the level of your handbrake handle. Make sure you put your car on the stand prior to any actions.
How do I adjust the automatic handbrake of my personal Fiat Panda?
Second system of handbrake adjustment upon Fiat Panda , this is an automatic handbrake, in contrast to the manual one, this is done directly on the brake drums or calipers, and is expected to adjust automatically for the wear of your brake shoes or disc brake pads. It may be that if you before long have to acquire brake pads, your handbrake will suffer power, allow me to share the steps for taking to check if the tension of your handbrake is the right one:
- Realize that an automatic handbrake can’t be adjusted directly because it is likely to adapt themselves to the wear of the disc brake pads or pads of your Fiat Panda.
- You can even now check that the system is working properly by simply putting your vehicle on the stand and checking by driving under the automobile that the pads are still in good working order.
- For drum brakes will probably be necessary to disassemble the brakes to check the state of the shoes, we all advise you to have it completed by a specialist.
- Remember to change your disc brake pads if you need to.
What is the cost of adjusting the handbrake of Fiat Panda by a specialist?
Finally, if you do not feel comfortable with this procedure, especially since it worries a safety element of your car, namely the adjustment of the handbrake of your Fiat Panda , we counsel you to go to a repair shop who are able to adjust your handbrake for the about fifty euros . For those who have problems with vibrations when braking on Fiat Panda, do not hesitate to refer to our content which relates to this problem.
To get more tips on the Fiat Panda, take a look at the Fiat Panda category.
