Your car’s handbrake is actually a required security feature according to the highway code, in fact , it aims to stop your Fiat Panda 2, even on a slight slope. It must be independent of the main brake system controls. It is also possible that after a while the wire system of the hand brake will loosen up and you will not pass the technical control or you may well feel that it is no longer stopping your car. To address these problems, we will look at how to adjust the hand brake on your Fiat Panda 2 . To do this, first we will see the adjustment of a manual handbrake on Fiat Panda 2 , in that case, in a second step, how to adjust an automatic handbrake, and then finally the price of the service performed by a professional.
Adjusting a manual handbrake on Fiat Panda 2?
So we begin our document with the hand brake adjustment of a Fiat Panda 2 in its manual version. This kind of version works in a simple way using a system of wire and screws that allow you to control the tension in the device and therefore to modify the stroke in the lever of your handbrake. To act on it you will need to act on these kinds of screws in order to stretch the handbrake cable of your Fiat Panda 2 . In any case, ahead of adjusting the hand brake, you must be sure your rear end wheels are certainly not blocked during the adjustment. Make sure you find below the detailed procedure to carry out this intervention:
- In the level of the handbrake, remove the plastic console that covers it using the torx screws and clips.
- Once carried out, you should see a trapdoor in your handbrake, open it to see the screw and wire system.
- You will have to locate the locknuts and loosen them with a wrench to allow you to replace the cable tension.
- Now screw on the lock nuts in both sides, be sure to make the comparable changes upon both sides to keep a balanced braking, and be sure the hand brake handle of your Fiat Panda 2 has a stroke of about three notches.
- Tighten up the locknuts and test the fastening of the wheels of your car, if it’s very good you can reassemble the set, otherwise tighten again the tightening screws until you get a great optimum setting
.
If you don’t have access to the handbrake flap of your Fiat Panda 2, the adjustment will be precisely the same but it will be done by passing beneath your car with the level of the handbrake handle. Be sure to set your car on the stand ahead of any action.
How do I adjust the automatic handbrake of my Fiat Panda 2?
Second system of handbrake adjustment in Fiat Panda 2 , this is an automatic handbrake, not like the manual one, that one is done on the brake drums or perhaps calipers, and is designed to adapt automatically for the wear of your brake shoes or pads. It may be that if you quickly have to buy brake pads, the handbrake will lose power, listed below are the steps to consider to examine if the strain of your handbrake is the right one:
- Remember that an automatic handbrake can not be modified directly because it is purported to adapt on its own to the wear of the pads or pads of your Fiat Panda 2.
- You can even now examine that the system is functioning properly simply by putting the car on the stand and verifying by driving under the car that the pads are still in good working order.
- For drum brakes will probably be required to disassemble the brakes to examine the state of the shoes, we recommend you to have it completed by a specialist.
- Make sure to change your pads if you need to.
What is the cost of adjusting the handbrake of Fiat Panda 2 by a specialist?
Finally, if you do not feel comfortable with this procedure, especially since it issues a safety element of your car, namely the adjustment in the handbrake of your Fiat Panda 2 , we counsel you to go to a mechanic who can adjust the handbrake for any about fifty euros . When you have problems with vibrations when braking on Fiat Panda 2, do not wait to refer to our document which relates to this problem.
If perhaps you have any further questions about the Fiat Panda 2, do not hesitate to consult our Fiat Panda 2 category.
