Your car’s handbrake is a obligatory protection feature according to the highway code, in fact , this aims to quit your Fiat Bravo, even on the slight incline. It must be independent of the main brake controls. It is also possible that with time the cable system of the hand brake will relax and you will not pass the technical control or you may feel that it truly is no longer blocking your car. To cope with these complications, we will look at how to adjust the hand brake on your Fiat Bravo . To accomplish this, first we will see the adjustment of the manual handbrake on Fiat Bravo , then simply, in a second step, how to adjust an automatic handbrake, and then the price of the service performed by a professional.
Adjusting a manual handbrake on Fiat Bravo?
Thus we start off our document with the hand brake adjustment of a Fiat Bravo in its manual version. This kind of version works in a simple way having a system of cable and screws that allow you to manage the tension on the device and so to modify the stroke on the lever of the handbrake. To act on it you should act on these types of screws in order to extend the handbrake cable of the Fiat Bravo . In any case, ahead of adjusting the hand brake, you must check that your rear end wheels are not blocked during the adjustment. Make sure you find under the detailed treatment to carry out this intervention:
- On the level of the handbrake, remove the plastic console that protects it using the torx screws and clips.
- Once completed, you should find out a trapdoor on your handbrake, open it to see the screw and cable system.
- You need to locate the locknuts and loosen them with a wrench tool to allow you to change the cable tension.
- Now screw on the locking mechanism nuts in both sides, make certain to make the comparable changes on both sides to keep a balanced braking, and check that the hand brake handle of your Fiat Bravo has a stroke of about 3 notches.
- Tighten the locknuts and test out the fastening of the tires of your car, if it’s good you can reassemble the set, otherwise tighten again the tightening screws until you get a great optimum setting
.
If you don’t have access to the handbrake flap of the Fiat Bravo, the adjustment will be precisely the same but it will be done by passing below your car in the level of the handbrake handle. Make sure put your car on the stand ahead of any action.
How do I adjust the automatic handbrake of my own Fiat Bravo?
Second system of handbrake adjustment in Fiat Bravo , this is an automatic handbrake, not like the manual one, this one is done upon the brake drums or calipers, and is imagined to adapt automatically towards the wear of the brake shoes or pads. It may be that if you shortly have to acquire brake pads, the handbrake will suffer power, allow me to share the steps for taking to verify if the tension of your handbrake is the right one:
- Be aware that an automatic handbrake cannot be modified directly because it is purported to adapt on its own to the put on of the pads or pads of your Fiat Bravo.
- You can still verify that the system is working correctly by putting the automobile on the stand and looking at by driving under the motor vehicle that the disc brake pads are still in good working order.
- For drum brakes it is required to take apart the brake systems to verify your the shoes, all of us advise you to have it achieved by a specialist.
- Make sure to replace your pads if you need to.
What is the cost of adjusting the handbrake of Fiat Bravo by a specialist?
Finally, if you do not feel comfortable with this procedure, especially since it questions a security component of your car, namely the adjustment on the handbrake of the Fiat Bravo , we advise you to go to a technician who are able to adjust the handbrake for the about fifty local currency . If you have problems with vibrations when braking on Fiat Bravo, do not hesitate to refer to our document which works with this problem.
If you have any additional questions about the Fiat Bravo, do not hesitate to consult our Fiat Bravo category.
