Your car’s handbrake is a required safety feature according to the highway code, in fact , it aims to stop your Ds Ds 3, even over a slight slope. It must be independent of the main brake system controls. It will be possible that after a while the wire system of the hand brake will relax and you will not pass the technical control or you may possibly feel that it truly is no longer blocking your car. To address these challenges, we will look at how to adjust the hand brake on your Ds Ds 3 . To accomplish this, first we will see the adjustment of your manual handbrake on Ds Ds 3 , then simply, in a second step, how to adjust an automatic handbrake, and then finally the price of the service performed by a professional.
Adjusting a manual handbrake on Ds Ds 3?
Therefore we start out our content with the hand brake adjustment of a Ds Ds 3 in its manual version. This version works in a simple way with a system of wire and screws that allow you to manage the tension from the device and thus to modify the stroke from the lever of your handbrake. To act on it you need to act on these screws in order to stretch the handbrake cable of your Ds Ds 3 . In any case, just before adjusting the hand brake, you must check that your rear wheels aren’t blocked throughout the adjustment. Make sure you find under the detailed treatment to carry out this kind of intervention:
- On the level of your handbrake, remove the plastic console that protects it using the torx screws and clips.
- Once done, you should find out a trapdoor in your handbrake, open it to see the screw and wire system.
- You will have to locate the locknuts and loosen them with a wrench to allow you to replace the cable stress.
- Now screw on the lock nuts about both sides, make sure you make the same changes on both sides to keep a balanced braking, and check that the hand brake lever of your Ds Ds 3 has a stroke of about 3 notches.
- Tighten the locknuts and check the fastening of the tires of your car, if it’s good you can reassemble the set, otherwise tighten again the tightening screws until you get an ideal configuration
.
If you don’t have access to the handbrake flap of your Ds Ds 3, the adjustment will be exactly the same however it will be done by passing beneath your car at the level of your handbrake lever. Make sure place your car on the stand just before any action.
How do I adjust the automatic handbrake of my Ds Ds 3?
Second approach to handbrake adjustment about Ds Ds 3 , this is an automatic handbrake, not like the manual one, this place is done on the brake drums or perhaps calipers, and is designed to change automatically to the wear of your brake shoes or disc brake pads. It may be that if you quickly have to acquire brake pads, your handbrake will suffer power, allow me to share the steps for taking to verify if the tension of your handbrake is the appropriate one:
- Take note that an automatic handbrake cannot be adjusted straight because it is meant to adapt itself to the wear of the disc brake pads or shoes of your Ds Ds 3.
- You can even now verify that the system is operating properly by simply putting your vehicle on the stand and looking at by driving under the vehicle that the brake pads are still in good performing order.
- For drum brakes it will be necessary to take apart the tires to verify the state of the shoes, we all suggest you to have it carried out by a professional.
- Remember to change your disc brake pads if you need to.
What is the price of adjusting the handbrake of Ds Ds 3 by a professional?
Finally, if you do not feel comfortable with this procedure, specifically since it questions a safety element of your car, namely the adjustment from the handbrake of your Ds Ds 3 , we give you advice to go to a auto technician who can adjust your handbrake for the about fifty euros . In case you have problems with vibrations when braking on Ds Ds 3, do not think twice to consult our content which deals with this problem.
If perhaps you have any further questions about the Ds Ds 3, do not hesitate to consult our Ds Ds 3 category.
