Your car’s handbrake is a required protection feature based on the highway code, in fact , it aims to end your Dodge Ram, even on the slight slope. It must be in addition to the main brake controls. It will be possible that over time the cable system of the hand brake will loosen up and you will certainly not pass the technical control or you may feel that it is actually no longer stopping your car. To cope with these problems, we will look at how to adjust the hand brake on your Dodge Ram . To do this, first we will see the adjustment of the manual handbrake on Dodge Ram , after that, in a second step, how to adjust an automatic handbrake, and finally the price of the service performed by a professional.
Adjusting a manual handbrake on Dodge Ram?
Thus we commence our article with the hand brake adjustment of a Dodge Ram in its manual version. This kind of version works in a basic way having a system of cable and screws that allow you to manage the tension on the device and thus to modify the stroke on the lever of your handbrake. To act on it you will have to act on these kinds of screws in order to stretch the handbrake cable of your Dodge Ram . In any case, just before adjusting the hand brake, you must be sure your rear end wheels aren’t blocked throughout the adjustment. Make sure you find under the detailed procedure to carry out this kind of intervention:
- At the level of the handbrake, remove the plastic console that protects it using the torx screws and clips.
- Once done, you should discover a trapdoor in your handbrake, open it up to see the screw and cable system.
- You will have to locate the locknuts and loosen them with a wrench tool to allow you to replace the cable stress.
- Now screw on the lock nuts in both sides, make sure you make the comparable changes on both sides to keep a balanced brake, and be sure the hand brake handle of your Dodge Ram has a stroke of about three notches.
- Tighten the locknuts and test out the fastening of the rims of your car, if it’s very good you can reassemble the set, otherwise tighten again the tightening screws until you get an optimum setting
.
If you don’t have access to the handbrake flap of your Dodge Ram, the adjustment will probably be precisely the same but it surely will be done by passing underneath your car in the level of the handbrake handle. Make sure set your car on the stand just before any actions.
How do I adjust the automatic handbrake of my own Dodge Ram?
Second system of handbrake adjustment in Dodge Ram , this is an automatic handbrake, unlike the manual one, this place is done directly on the brake drums or calipers, and is also imagined to adapt automatically for the wear of your brake shoes or disc brake pads. It may be that if you rapidly have to buy brake pads, the handbrake will suffer power, allow me to share the steps to consider to verify if the tension of your handbrake is the appropriate one:
- Realize that an automatic handbrake can not be adjusted directly because it is meant to adapt on its own to the wear of the disc brake pads or shoes of your Dodge Ram.
- You can nonetheless verify that the system is operating effectively by putting your vehicle on the stand and examining by driving under the car that the pads are still in good functioning order.
- For drum brakes it will be required to disassemble the tires to verify the state of the shoes, we all encourage you to have it achieved by a professional.
- Make sure to replace your disc brake pads if you need to.
What is the price of adjusting the handbrake of Dodge Ram by a professional?
Finally, if you do not feel comfortable with this procedure, specifically since it fears a security component of your car, namely the adjustment on the handbrake of your Dodge Ram , we inform you to go to a repair shop who are able to adjust the handbrake for any about fifty local currency . If you have problems with vibrations when braking on Dodge Ram, do not wait to refer to our article which deals with this trouble.
To find more tips on the Dodge Ram, take a look at the Dodge Ram category.
