Your car’s handbrake is a obligatory safety feature according to the highway code, in fact , this aims to stop your Chrysler Sebring, even over a slight incline. It must be independent of the main brake controls. It will be possible that after a while the cable system of the hand brake will loosen up and you will not really pass the technical control or you may feel that it is no longer stopping your car. To address these concerns, we will look at how to adjust the hand brake on your Chrysler Sebring . To accomplish this, first we will see the adjustment of the manual handbrake on Chrysler Sebring , then simply, in a second step, how to adjust an automatic handbrake, and finally the price of the service performed by a professional.

adjust-handbrake-chrysler-sebring

Adjusting a manual handbrake on Chrysler Sebring?

Therefore we start off our article with the hand brake adjustment of a Chrysler Sebring in its manual version. This kind of version works in a simple way using a system of cable and anchoring screws that allow you to control the tension of the device and so to modify the stroke of the lever of your handbrake. To act on it you will have to act on these screws in order to extend the handbrake cable of your Chrysler Sebring . In any case, before adjusting the hand brake, you must check that your rear wheels aren’t blocked through the adjustment. Please find under the detailed procedure to carry out this intervention:

  • On the level of the handbrake, remove the plastic console that covers it using the torx screws and clips.
  • Once performed, you should find out a trapdoor on your handbrake, open it up to see the screw and cable system.
  • You need to locate the locknuts and loosen them with a wrench to allow you to change the cable pressure.
  • Now screw on the locking mechanism nuts on both sides, make certain to make the same changes on both sides to keep a balanced brake, and check that the hand brake lever of your Chrysler Sebring has a stroke of about three notches.
  • Tighten up the locknuts and check the locking of the rims of your car, if it’s very good you can reassemble the set, otherwise tighten up again the tightening anchoring screws until you get an optimum setting

.
If you don’t have access to the handbrake flap of your Chrysler Sebring, the adjustment will be precisely the same however it will be done by passing beneath your car on the level of the handbrake lever. Make sure set your car on the stand before any action.

How do I adjust the automatic handbrake of my Chrysler Sebring?

Second system of handbrake adjustment on Chrysler Sebring , this is an automatic handbrake, contrary to the manual one, this place is done upon the brake drums or perhaps calipers, and is expected to change automatically to the wear of your brake shoes or brake pads. It may be that if you before long have to purchase brake pads, the handbrake will suffer power, allow me to share the steps to take to examine if the strain of your handbrake is the right one:

  • Realize that an automatic handbrake cannot be modified straight because it is likely to adapt on its own to the use of the brake pads or shoes of your Chrysler Sebring.
  • You can even now examine that the system is functioning properly simply by putting the vehicle on the stand and checking out by driving under the automobile that the disc brake pads are still in good performing order.
  • For drum brakes it will probably be required to disassemble the tires to examine the state of the shoes, all of us advise you to have it done by a specialist.
  • Be sure you change your brake pads if you need to.

What is the cost of adjusting the handbrake of Chrysler Sebring by a specialist?

Finally, if you do not feel comfortable with this procedure, specifically since it fears a safety component of your car, namely the adjustment of the handbrake of your Chrysler Sebring , we counsel you to go to a mechanic who can adjust the handbrake for a about fifty euros . For those who have problems with vibrations when braking on Chrysler Sebring, do not think twice to refer to our article which refers to this problem.

To find more tips on the Chrysler Sebring, take a look at the Chrysler Sebring category.