Your car’s handbrake is a obligatory security feature based on the highway code, in fact , it aims to stop your Chevrolet Cruze, even over a slight slope. It must be in addition to the main brake system controls. It is also possible that with time the cable system of the hand brake will loosen up and you will not pass the technical control or you could feel that it can be no longer blocking your car. To cope with these complications, we will look at how to adjust the hand brake on your Chevrolet Cruze . To get this done, first we will see the adjustment of the manual handbrake on Chevrolet Cruze , in that case, in a second step, how to adjust an automatic handbrake, and then finally the price of the service performed by a professional.

adjust-handbrake-chevrolet-cruze

Adjusting a manual handbrake on Chevrolet Cruze?

So we commence our document with the hand brake adjustment of a Chevrolet Cruze in its manual version. This version performs in a basic way using a system of cable and anchoring screws that allow you to control the tension in the device and so to modify the stroke in the lever of your handbrake. To act on it you will need to act on these screws in order to stretch the handbrake cable of your Chevrolet Cruze . In any case, prior to adjusting the hand brake, you must be sure your rear end wheels are not blocked during the adjustment. Make sure you find below the detailed method to carry out this intervention:

  • At the level of your handbrake, remove the plastic console that protects it using the torx screws and clips.
  • Once carried out, you should find out a trapdoor in your handbrake, open it to see the screw and cable system.
  • You will have to locate the locknuts and loosen them with a wrench to allow you to change the cable pressure.
  • Now screw on the locking mechanism nuts upon both sides, be sure to make the same changes on both sides to keep a balanced braking, and be sure the hand brake lever of your Chevrolet Cruze has a stroke of about three notches.
  • Tighten up the locknuts and test out the locking of the tires of your car, if it’s good you can reassemble the set, otherwise tighten up again the tightening anchoring screws until you get an optimal setting

.
If you don’t have access to the handbrake flap of your Chevrolet Cruze, the adjustment will be precisely the same nonetheless it will be done by passing below your car at the level of your handbrake lever. Be sure to place your car on the stand prior to any action.

How do I adjust the automatic handbrake of my Chevrolet Cruze?

Second system of handbrake adjustment upon Chevrolet Cruze , this is an automatic handbrake, as opposed to the manual one, this one is done on the brake drums or calipers, and is designed to adapt automatically to the wear of your brake shoes or brake pads. It may be that if you soon have to get brake pads, your handbrake will suffer power, listed below are the steps to consider to verify if the tension of your handbrake is the appropriate one:

  • Be aware that an automatic handbrake cannot be adjusted straight because it is likely to adapt itself to the put on of the brake pads or pads of your Chevrolet Cruze.
  • You can still verify that the system is operating correctly simply by putting your vehicle on the stand and verifying by driving under the automobile that the brake pads are still in good working order.
  • For drum brakes will probably be necessary to disassemble the brakes to verify your the shoes, we all recommend you to have it completed by a professional.
  • Remember to replace your brake pads if you need to.

What is the price of adjusting the handbrake of Chevrolet Cruze by a professional?

Finally, if you do not feel comfortable with this procedure, specifically since it issues a safety component of your car, namely the adjustment in the handbrake of your Chevrolet Cruze , we inform you to go to a motor mechanic that can adjust your handbrake to get a about fifty euros . In case you have problems with vibrations when braking on Chevrolet Cruze, do not hesitate to refer to our document which works with this issue.

If you need more tutorials on the Chevrolet Cruze, go to our Chevrolet Cruze category.