Your car’s handbrake is a mandatory security feature based on the highway code, in fact , this aims to quit your Cadillac DTS, even on a slight slope. It must be independent of the main brake system controls. It will be possible that with time the wire system of the hand brake will relax and you will not pass the technical control or you may feel that it is no longer blocking your car. To deal with these complications, we will look at how to adjust the hand brake on your Cadillac DTS . To achieve this, first we will see the adjustment of the manual handbrake on Cadillac DTS , then simply, in a second step, how to adjust an automatic handbrake, and then finally the price of the service performed by a professional.
Adjusting a manual handbrake on Cadillac DTS?
Therefore we start our document with the hand brake adjustment of a Cadillac DTS in its manual version. This kind of version works in a basic way which has a system of wire and anchoring screws that allow you to control the tension on the device and so to modify the stroke on the lever of the handbrake. To act on it you will need to act on these screws to be able to stretch out the handbrake cable of the Cadillac DTS . In any case, just before adjusting the hand brake, you must be sure your rear wheels aren’t blocked throughout the adjustment. Please find below the detailed technique to carry out this intervention:
- On the level of the handbrake, remove the plastic console that protects it using the torx screws and clips.
- Once carried out, you should see a trapdoor in your handbrake, open it up to see the screw and wire system.
- You need to locate the locknuts and loosen them with a wrench tool to allow you to change the cable pressure.
- Now screw on the lock nuts in both sides, make sure to make the exact changes upon both sides to keep a balanced brake, and be sure the hand brake lever of your Cadillac DTS has a stroke of about three notches.
- Tighten the locknuts and test the locking of the rims of your car, if it’s good you can reassemble the set, otherwise tighten up again the tightening anchoring screws until you get an ideal setting
.
If you don’t have access to the handbrake flap of the Cadillac DTS, the adjustment will be precisely the same however it will be done by passing underneath your car in the level of the handbrake lever. Be sure to place your car on the stand just before any actions.
How do I adjust the automatic handbrake of my own Cadillac DTS?
Second system of handbrake adjustment in Cadillac DTS , this is an automatic handbrake, in contrast to the manual one, this method is done upon the brake drums or calipers, which is imagined to change automatically for the wear of the brake shoes or pads. It may be that if you quickly have to purchase brake pads, the handbrake will lose power, allow me to share the steps to consider to verify if the strain of your handbrake is the appropriate one:
- Bear in mind that an automatic handbrake can not be modified directly because it is likely to adapt itself to the wear of the pads or shoes of your Cadillac DTS.
- You can still verify that the system is functioning correctly by simply putting the automobile on the stand and checking by driving under the vehicle that the disc brake pads are still in good working order.
- For drum brakes it will probably be required to disassemble the brake systems to verify your the shoes, all of us recommend you to have it carried out by a professional.
- Make sure to change your pads if you need to.
What is the price of adjusting the handbrake of Cadillac DTS by a professional?
Finally, if you do not feel comfortable with this procedure, specifically since it issues a safety component of your car, namely the adjustment on the handbrake of the Cadillac DTS , we give you advice to go to a repair shop that can adjust the handbrake for a about fifty euros . For those who have problems with vibrations when braking on Cadillac DTS, do not wait to refer to our document which refers to this problem.
If you need more guides on the Cadillac DTS, go to our Cadillac DTS category.
