Your car’s handbrake is actually a mandatory safety feature based on the highway code, in fact , this aims to end your Bmw Z4, even on a slight slope. It must be in addition to the main brake system controls. It will be possible that with time the cable system of the hand brake will loosen up and you will certainly not pass the technical control or you may possibly feel that it is actually no longer stopping your car. To deal with these problems, we will look at how to adjust the hand brake on your Bmw Z4 . To do this, first we will see the adjustment of the manual handbrake on Bmw Z4 , in that case, in a second step, how to adjust an automatic handbrake, and finally the price of the service performed by a professional.
Adjusting a manual handbrake on Bmw Z4?
Thus we begin our document with the hand brake adjustment of a Bmw Z4 in its manual version. This kind of version performs in a simple way with a system of cable and screws that allow you to control the tension with the device and therefore to modify the stroke with the lever of your handbrake. To act on it you should act on these kinds of screws in order to extend the handbrake cable of your Bmw Z4 . In any case, prior to adjusting the hand brake, you must make sure that your rear end wheels are certainly not blocked through the adjustment. Make sure you find below the detailed procedure to carry out this intervention:
- On the level of the handbrake, remove the plastic console that protects it using the torx screws and clips.
- Once carried out, you should discover a trapdoor on your handbrake, open it to see the screw and cable system.
- You will have to locate the locknuts and loosen them with a wrench tool to allow you to replace the cable pressure.
- Now screw on the lock nuts about both sides, make sure you make the comparable changes upon both sides to keep a balanced brake, and make sure that the hand brake lever of your Bmw Z4 has a stroke of about three notches.
- Tighten up the locknuts and test the locking of the rims of your car, if it’s great you can reassemble the set, otherwise tighten again the tightening screws until you get an ideal setting
.
If you don’t have access to the handbrake flap of your Bmw Z4, the adjustment will probably be exactly the same but it surely will be done by passing underneath your car on the level of the handbrake lever. Make sure to set your car on the stand prior to any actions.
How do I adjust the automatic handbrake of my Bmw Z4?
Second approach to handbrake adjustment about Bmw Z4 , this is an automatic handbrake, in contrast to the manual one, this one is done upon the brake drums or perhaps calipers, which is supposed to change automatically towards the wear of your brake shoes or pads. It may be that if you shortly have to acquire brake pads, the handbrake will suffer power, listed below are the steps for taking to examine if the tension of your handbrake is the appropriate one:
- Be aware that an automatic handbrake can’t be adjusted directly because it is supposed to adapt alone to the wear of the pads or pads of your Bmw Z4.
- You can nonetheless examine that the system is functioning correctly by putting the car on the stand and examining by driving under the car that the disc brake pads are still in good working order.
- For drum brakes it will be necessary to take apart the brake systems to examine the state of the shoes, all of us recommend you to have it done by a specialist.
- Be sure you replace your pads if you need to.
What is the cost of adjusting the handbrake of Bmw Z4 by a specialist?
Finally, if you do not feel comfortable with this procedure, especially since it issues a safety element of your car, namely the adjustment with the handbrake of your Bmw Z4 , we inform you to go to a repair shop who are able to adjust the handbrake for the about fifty local currency . In case you have problems with vibrations when braking on Bmw Z4, do not wait to consult our document which refers to this problem.
If you wish more tutorials on the Bmw Z4, go to our Bmw Z4 category.
