Your car’s handbrake is a obligatory basic safety feature based on the highway code, in fact , this aims to end your BMW X1, even over a slight slope. It must be in addition to the main brake system controls. It is also possible that after a while the cable system of the hand brake will loosen up and you will certainly not pass the technical control or you may possibly feel that it is no longer stopping your car. To deal with these concerns, we will look at how to adjust the hand brake on your BMW X1 . To accomplish this, first we will see the adjustment of the manual handbrake on BMW X1 , in that case, in a second step, how to adjust an automatic handbrake, and then finally the price of the service performed by a professional.
Adjusting a manual handbrake on BMW X1?
Thus we start off our content with the hand brake adjustment of a BMW X1 in its manual version. This version performs in a simple way using a system of cable and anchoring screws that allow you to control the tension of the device and therefore to modify the stroke of the lever of your handbrake. To act on it you should act on these kinds of screws in order to expand the handbrake cable of your BMW X1 . In any case, prior to adjusting the hand brake, you must check that your rear wheels aren’t blocked throughout the adjustment. Make sure you find below the detailed procedure to carry out this intervention:
- At the level of the handbrake, remove the plastic console that protects it using the torx screws and clips.
- Once completed, you should find out a trapdoor on your handbrake, open it up to see the screw and cable system.
- You need to locate the locknuts and loosen them with a wrench to allow you to replace the cable pressure.
- Now screw on the lock nuts upon both sides, make sure to make the exact changes upon both sides to hold a balanced braking, and check that the hand brake lever of your BMW X1 has a stroke of about 3 notches.
- Tighten up the locknuts and test the locking of the wheels of your car, if it’s great you can reassemble the set, otherwise tighten again the tightening anchoring screws until you get an optimum setting
.
If you don’t have access to the handbrake flap of your BMW X1, the adjustment will be precisely the same however it will be done by passing under your car at the level of the handbrake lever. Make sure to set your car on the stand prior to any actions.
How do I adjust the automatic handbrake of my personal BMW X1?
Second system of handbrake adjustment upon BMW X1 , this is an automatic handbrake, unlike the manual one, this is done directly on the brake drums or perhaps calipers, which is supposed to change automatically to the wear of your brake shoes or disc brake pads. It may be that if you rapidly have to buy brake pads, the handbrake will suffer power, listed below are the steps to consider to check if the tension of your handbrake is the right one:
- Realize that an automatic handbrake can’t be adjusted straight because it is meant to adapt by itself to the don of the disc brake pads or shoes of your BMW X1.
- You can still check that the system is working properly simply by putting the car on the stand and looking at by driving under the motor vehicle that the pads are still in good functioning order.
- For drum brakes it will probably be necessary to take apart the brakes to check your the shoes, we all advise you to have it carried out by a professional.
- Remember to replace your disc brake pads if you need to.
What is the price of adjusting the handbrake of BMW X1 by a professional?
Finally, if you do not feel comfortable with this procedure, especially since it fears a safety component of your car, namely the adjustment of the handbrake of your BMW X1 , we advise you to go to a mechanic that can adjust the handbrake for your about fifty euros . When you have problems with vibrations when braking on BMW X1, do not wait to refer to our content which refers to this problem.
To find more tips on the BMW X1, take a look at the BMW X1 category.
