Your car’s handbrake is actually a obligatory basic safety feature according to the highway code, in fact , it aims to quit your Audi Tt, even on the slight incline. It must be independent of the main brake controls. It will be possible that after a while the wire system of the hand brake will relax and you will certainly not pass the technical control or you may feel that it truly is no longer stopping your car. To address these concerns, we will look at how to adjust the hand brake on your Audi Tt . To accomplish this, first we will see the adjustment of your manual handbrake on Audi Tt , then simply, in a second step, how to adjust an automatic handbrake, and finally the price of the service performed by a professional.
Adjusting a manual handbrake on Audi Tt?
Therefore we commence our document with the hand brake adjustment of a Audi Tt in its manual version. This version works in a simple way with a system of wire and anchoring screws that allow you to control the tension of the device and so to modify the stroke of the lever of the handbrake. To act on it you should act on these screws in order to expand the handbrake cable of the Audi Tt . In any case, prior to adjusting the hand brake, you must make sure that your rear wheels are certainly not blocked through the adjustment. Make sure you find under the detailed treatment to carry out this intervention:
- In the level of your handbrake, remove the plastic console that protects it using the torx screws and clips.
- Once performed, you should discover a trapdoor on your handbrake, open it up to see the screw and wire system.
- You will need to locate the locknuts and loosen them with a wrench tool to allow you to change the cable stress.
- Now screw on the lock nuts in both sides, make sure you make the comparable changes on both sides to hold a balanced braking, and make sure that the hand brake handle of your Audi Tt has a stroke of about 3 notches.
- Tighten the locknuts and check the locking of the rims of your car, if it’s good you can reassemble the set, otherwise tighten up again the tightening anchoring screws until you get an ideal setting
.
If you don’t have access to the handbrake flap of the Audi Tt, the adjustment will probably be precisely the same but it really will be done by passing underneath your car in the level of your handbrake handle. Remember to place your car on the stand prior to any action.
How do I adjust the automatic handbrake of my Audi Tt?
Second system of handbrake adjustment in Audi Tt , this is an automatic handbrake, as opposed to the manual one, this place is done upon the brake drums or perhaps calipers, which is imagined to change automatically for the wear of the brake shoes or disc brake pads. It may be that if you shortly have to get brake pads, your handbrake will lose power, here are the steps for taking to check if the strain of your handbrake is the appropriate one:
- Be aware that an automatic handbrake can not be adjusted directly because it is meant to adapt by itself to the wear of the disc brake pads or pads of your Audi Tt.
- You can still check that the system is operating properly simply by putting the car on the stand and examining by driving under the motor vehicle that the brake pads are still in good working order.
- For drum brakes it will probably be necessary to disassemble the tires to check the state of the shoes, we all encourage you to have it performed by a professional.
- Make sure to change your disc brake pads if you need to.
What is the price of adjusting the handbrake of Audi Tt by a professional?
Finally, if you do not feel comfortable with this procedure, specifically since it fears a security element of your car, namely the adjustment of the handbrake of the Audi Tt , we inform you to go to a mechanic that can adjust your handbrake for a about fifty euros . When you have problems with vibrations when braking on Audi Tt, do not wait to consult our document which relates to this issue.
To get more tips on the Audi Tt, take a look at the Audi Tt category.
