Your car’s handbrake is actually a obligatory security feature according to the highway code, in fact , this aims to quit your Audi R8, even over a slight incline. It must be independent of the main brake controls. It is also possible that after some time the wire system of the hand brake will loosen up and you will not pass the technical control or you may well feel that it is no longer stopping your car. To deal with these problems, we will look at how to adjust the hand brake on your Audi R8 . To get this done, first we will see the adjustment of a manual handbrake on Audi R8 , after that, in a second step, how to adjust an automatic handbrake, and then the price of the service performed by a professional.
Adjusting a manual handbrake on Audi R8?
Thus we start out our content with the hand brake adjustment of a Audi R8 in its manual version. This kind of version works in a simple way with a system of wire and screws that allow you to manage the tension in the device and so to modify the stroke in the lever of your handbrake. To act on it you will need to act on these kinds of screws in order to stretch the handbrake cable of your Audi R8 . In any case, ahead of adjusting the hand brake, you must make sure that your back wheels aren’t blocked through the adjustment. Make sure you find under the detailed method to carry out this kind of intervention:
- At the level of the handbrake, remove the plastic console that covers it using the torx screws and clips.
- Once completed, you should find out a trapdoor on your handbrake, open it to see the screw and wire system.
- You need to locate the locknuts and loosen them with a wrench to allow you to replace the cable stress.
- Now screw on the locking mechanism nuts about both sides, make sure you make the comparable changes upon both sides to hold a balanced brake, and make sure that the hand brake handle of your Audi R8 has a stroke of about three notches.
- Tighten the locknuts and check the locking of the tires of your car, if it’s very good you can reassemble the set, otherwise tighten up again the tightening screws until you get a great optimal configuration
.
If you don’t have access to the handbrake flap of your Audi R8, the adjustment will be precisely the same but it really will be done by passing below your car in the level of the handbrake handle. Make sure to put your car on the stand ahead of any actions.
How do I adjust the automatic handbrake of my own Audi R8?
Second approach to handbrake adjustment about Audi R8 , this is an automatic handbrake, in contrast to the manual one, this is done directly on the brake drums or calipers, which is imagined to change automatically to the wear of your brake shoes or brake pads. It may be that if you soon have to acquire brake pads, the handbrake will lose power, listed below are the steps for taking to examine if the strain of your handbrake is the right one:
- Be aware that an automatic handbrake can not be modified directly because it is purported to adapt alone to the wear of the brake pads or shoes of your Audi R8.
- You can even now examine that the system is functioning correctly simply by putting the automobile on the stand and checking out by driving under the auto that the pads are still in good working order.
- For drum brakes it can be necessary to take apart the tires to examine the state of the shoes, all of us recommend you to have it achieved by a professional.
- Be sure you replace your brake pads if you need to.
What is the price of adjusting the handbrake of Audi R8 by a professional?
Finally, if you do not feel comfortable with this procedure, specifically since it worries a safety component of your car, namely the adjustment in the handbrake of your Audi R8 , we inform you to go to a repair shop who can adjust the handbrake for a about fifty local currency . In case you have problems with vibrations when braking on Audi R8, do not wait to consult our content which works with this trouble.
If you wish more tutorials on the Audi R8, go to our Audi R8 category.
