Your car’s handbrake is actually a obligatory security feature according to the highway code, in fact , it aims to end your Audi Q5, even on the slight incline. It must be in addition to the main brake controls. It will be possible that after some time the wire system of the hand brake will loosen up and you will not really pass the technical control or you may well feel that it can be no longer stopping your car. To address these problems, we will look at how to adjust the hand brake on your Audi Q5 . To achieve this, first we will see the adjustment of your manual handbrake on Audi Q5 , in that case, in a second step, how to adjust an automatic handbrake, and then the price of the service performed by a professional.
Adjusting a manual handbrake on Audi Q5?
Therefore we start out our document with the hand brake adjustment of a Audi Q5 in its manual version. This version works in a simple way having a system of wire and anchoring screws that allow you to control the tension on the device and therefore to modify the stroke on the lever of your handbrake. To act on it you must act on these types of screws in order to stretch the handbrake cable of your Audi Q5 . In any case, before adjusting the hand brake, you must be sure your rear wheels are not blocked throughout the adjustment. Please find below the detailed treatment to carry out this intervention:
- On the level of your handbrake, remove the plastic console that covers it using the torx screws and clips.
- Once carried out, you should discover a trapdoor on your handbrake, open it to see the screw and wire system.
- You will have to locate the locknuts and loosen them with a wrench tool to allow you to replace the cable tension.
- Now screw on the lock nuts on both sides, make certain to make the comparable changes upon both sides to hold a balanced braking, and be sure the hand brake handle of your Audi Q5 has a stroke of about three notches.
- Tighten up the locknuts and test out the fastening of the tires of your car, if it’s good you can reassemble the set, otherwise tighten up again the tightening anchoring screws until you get an ideal setting
.
If you don’t have access to the handbrake flap of your Audi Q5, the adjustment will probably be precisely the same however it will be done by passing under your car in the level of your handbrake handle. Remember to place your car on the stand before any action.
How do I adjust the automatic handbrake of my own Audi Q5?
Second system of handbrake adjustment on Audi Q5 , this is an automatic handbrake, as opposed to the manual one, this method is done upon the brake drums or calipers, and is also meant to adapt automatically for the wear of your brake shoes or brake pads. It may be that if you before long have to get brake pads, your handbrake will suffer power, allow me to share the steps to consider to examine if the strain of your handbrake is the right one:
- Remember that an automatic handbrake can’t be adjusted straight because it is purported to adapt themselves to the wear of the brake pads or pads of your Audi Q5.
- You can nonetheless examine that the system is working correctly by simply putting the vehicle on the stand and verifying by driving under the motor vehicle that the pads are still in good functioning order.
- For drum brakes it is necessary to take apart the tires to examine your the shoes, all of us suggest you to have it done by a specialist.
- Make sure to replace your brake pads if you need to.
What is the price of adjusting the handbrake of Audi Q5 by a specialist?
Finally, if you do not feel comfortable with this procedure, especially since it concerns a security component of your car, namely the adjustment on the handbrake of your Audi Q5 , we counsel you to go to a motor mechanic that can adjust your handbrake to get a about fifty local currency . For those who have problems with vibrations when braking on Audi Q5, do not think twice to consult our document which deals with this issue.
To find more tips on the Audi Q5, take a look at the Audi Q5 category.
