Your car’s handbrake is actually a mandatory basic safety feature according to the highway code, in fact , this aims to end your Audi Q3, even on the slight incline. It must be independent of the main brake system controls. It will be possible that as time passes the cable system of the hand brake will loosen up and you will not pass the technical control or you might feel that it is no longer blocking your car. To address these challenges, we will look at how to adjust the hand brake on your Audi Q3 . To achieve this, first we will see the adjustment of a manual handbrake on Audi Q3 , then simply, in a second step, how to adjust an automatic handbrake, and then the price of the service performed by a professional.
Adjusting a manual handbrake on Audi Q3?
Therefore we begin our document with the hand brake adjustment of a Audi Q3 in its manual version. This version performs in a basic way which has a system of cable and screws that allow you to control the tension on the device and so to modify the stroke on the lever of your handbrake. To act on it you must act on these kinds of screws to be able to expand the handbrake cable of your Audi Q3 . In any case, just before adjusting the hand brake, you must check that your rear wheels are certainly not blocked through the adjustment. Make sure you find under the detailed technique to carry out this intervention:
- On the level of your handbrake, remove the plastic console that protects it using the torx screws and clips.
- Once performed, you should see a trapdoor in your handbrake, open it up to see the screw and cable system.
- You will need to locate the locknuts and loosen them with a wrench tool to allow you to change the cable pressure.
- Now screw on the lock nuts on both sides, be sure to make the comparable changes on both sides to keep a balanced braking, and check that the hand brake lever of your Audi Q3 has a stroke of about three notches.
- Tighten up the locknuts and check the fastening of the tires of your car, if it’s great you can reassemble the set, otherwise tighten up again the tightening screws until you get a great optimum configuration
.
If you don’t have access to the handbrake flap of your Audi Q3, the adjustment will be exactly the same nonetheless it will be done by passing directly below your car at the level of your handbrake lever. Remember to set your car on the stand just before any actions.
How do I adjust the automatic handbrake of my personal Audi Q3?
Second approach to handbrake adjustment on Audi Q3 , this is an automatic handbrake, contrary to the manual one, this is done directly on the brake drums or calipers, and is supposed to change automatically to the wear of your brake shoes or pads. It may be that if you quickly have to buy brake pads, your handbrake will lose power, here are the steps for taking to examine if the strain of your handbrake is the appropriate one:
- Realize that an automatic handbrake can not be modified directly because it is designed to adapt itself to the use of the pads or shoes of your Audi Q3.
- You can even now examine that the system is functioning effectively by putting the car on the stand and examining by driving under the car that the brake pads are still in good performing order.
- For drum brakes it is required to take apart the brakes to examine the state of the shoes, we all encourage you to have it achieved by a professional.
- Make sure to change your pads if you need to.
What is the cost of adjusting the handbrake of Audi Q3 by a professional?
Finally, if you do not feel comfortable with this procedure, specifically since it fears a security component of your car, namely the adjustment on the handbrake of your Audi Q3 , we give you advice to go to a mechanic who are able to adjust your handbrake for any about fifty euros . If you have problems with vibrations when braking on Audi Q3, do not wait to consult our document which works with this trouble.
If you wish more guides on the Audi Q3, go to our Audi Q3 category.
