Your car’s handbrake is actually a required basic safety feature based on the highway code, in fact , it aims to stop your Audi A8, even over a slight incline. It must be independent of the main brake system controls. It is also possible that as time passes the wire system of the hand brake will relax and you will not pass the technical control or you may well feel that it is actually no longer stopping your car. To cope with these challenges, we will look at how to adjust the hand brake on your Audi A8 . To accomplish this, first we will see the adjustment of the manual handbrake on Audi A8 , in that case, in a second step, how to adjust an automatic handbrake, and ultimately the price of the service performed by a professional.
Adjusting a manual handbrake on Audi A8?
Therefore we start off our content with the hand brake adjustment of a Audi A8 in its manual version. This kind of version works in a basic way using a system of wire and screws that allow you to manage the tension on the device and so to modify the stroke on the lever of your handbrake. To act on it you will have to act on these kinds of screws to be able to stretch the handbrake cable of your Audi A8 . In any case, ahead of adjusting the hand brake, you must make sure that your rear end wheels aren’t blocked throughout the adjustment. Make sure you find under the detailed procedure to carry out this intervention:
- With the level of the handbrake, remove the plastic console that protects it using the torx screws and clips.
- Once completed, you should find out a trapdoor on your handbrake, open it to see the screw and wire system.
- You will have to locate the locknuts and loosen them with a wrench tool to allow you to replace the cable tension.
- Now screw on the locking mechanism nuts upon both sides, be sure to make the same changes upon both sides to hold a balanced braking, and make sure that the hand brake lever of your Audi A8 has a stroke of about three notches.
- Tighten up the locknuts and test out the locking of the rims of your car, if it’s great you can reassemble the set, otherwise tighten again the tightening screws until you get a great optimal setting
.
If you don’t have access to the handbrake flap of your Audi A8, the adjustment will be exactly the same but it will be done by passing under your car in the level of the handbrake lever. Remember to put your car on the stand ahead of any action.
How do I adjust the automatic handbrake of my personal Audi A8?
Second system of handbrake adjustment upon Audi A8 , this is an automatic handbrake, not like the manual one, this is done directly on the brake drums or calipers, and is also designed to adjust automatically for the wear of your brake shoes or disc brake pads. It may be that if you quickly have to purchase brake pads, the handbrake will lose power, listed below are the steps to consider to verify if the tension of your handbrake is the appropriate one:
- Remember that an automatic handbrake can not be adjusted straight because it is designed to adapt on its own to the put on of the disc brake pads or pads of your Audi A8.
- You can still verify that the system is operating effectively by putting your vehicle on the stand and checking out by driving under the auto that the disc brake pads are still in good functioning order.
- For drum brakes will probably be required to disassemble the brake systems to verify your the shoes, we encourage you to have it performed by a professional.
- Remember to change your disc brake pads if you need to.
What is the cost of adjusting the handbrake of Audi A8 by a professional?
Finally, if you do not feel comfortable with this procedure, especially since it worries a security component of your car, namely the adjustment on the handbrake of your Audi A8 , we advise you to go to a technician who can adjust the handbrake for the about fifty euros . In case you have problems with vibrations when braking on Audi A8, do not hesitate to refer to our content which deals with this issue.
If you wish more tutorials on the Audi A8, go to our Audi A8 category.
