Your car’s handbrake is actually a required safety feature based on the highway code, in fact , this aims to stop your Audi A2, even over a slight incline. It must be independent of the main brake system controls. It will be possible that after a while the wire system of the hand brake will relax and you will not really pass the technical control or you may well feel that it is actually no longer blocking your car. To cope with these challenges, we will look at how to adjust the hand brake on your Audi A2 . To achieve this, first we will see the adjustment of a manual handbrake on Audi A2 , then, in a second step, how to adjust an automatic handbrake, and finally the price of the service performed by a professional.
Adjusting a manual handbrake on Audi A2?
Thus we start our document with the hand brake adjustment of a Audi A2 in its manual version. This kind of version works in a basic way which has a system of wire and anchoring screws that allow you to manage the tension on the device and therefore to modify the stroke on the lever of your handbrake. To act on it you should act on these kinds of screws to be able to stretch the handbrake cable of your Audi A2 . In any case, ahead of adjusting the hand brake, you must check that your rear wheels aren’t blocked through the adjustment. Make sure you find below the detailed treatment to carry out this intervention:
- With the level of the handbrake, remove the plastic console that covers it using the torx screws and clips.
- Once carried out, you should see a trapdoor on your handbrake, open it up to see the screw and wire system.
- You will need to locate the locknuts and loosen them with a wrench tool to allow you to replace the cable stress.
- Now screw on the locking mechanism nuts upon both sides, make sure to make the exact changes upon both sides to hold a balanced brake, and check that the hand brake lever of your Audi A2 has a stroke of about three notches.
- Tighten up the locknuts and test the fastening of the tires of your car, if it’s very good you can reassemble the set, otherwise tighten up again the tightening anchoring screws until you get an ideal configuration
.
If you don’t have access to the handbrake flap of your Audi A2, the adjustment will probably be exactly the same however it will be done by passing under your car at the level of the handbrake lever. Make sure you put your car on the stand ahead of any action.
How do I adjust the automatic handbrake of my Audi A2?
Second approach to handbrake adjustment upon Audi A2 , this is an automatic handbrake, unlike the manual one, that one is done on the brake drums or perhaps calipers, which is supposed to adjust automatically for the wear of your brake shoes or pads. It may be that if you soon have to acquire brake pads, the handbrake will suffer power, allow me to share the steps to take to verify if the strain of your handbrake is the right one:
- Be aware that an automatic handbrake can not be adjusted directly because it is purported to adapt on its own to the have on of the pads or shoes of your Audi A2.
- You can nonetheless verify that the system is working effectively by putting the automobile on the stand and examining by driving under the car that the pads are still in good performing order.
- For drum brakes it will be required to disassemble the brakes to verify the state of the shoes, all of us encourage you to have it completed by a specialist.
- Make sure to change your pads if you need to.
What is the price of adjusting the handbrake of Audi A2 by a specialist?
Finally, if you do not feel comfortable with this procedure, specifically since it issues a security element of your car, namely the adjustment on the handbrake of your Audi A2 , we advise you to go to a motor mechanic that can adjust the handbrake for the about fifty local currency . For those who have problems with vibrations when braking on Audi A2, do not wait to consult our document which works with this issue.
If you have any further questions about the Audi A2, do not hesitate to consult our Audi A2 category.
