Your car’s handbrake is a required security feature based on the highway code, in fact , it aims to stop your Acura TL, even over a slight incline. It must be in addition to the main brake system controls. It will be possible that with time the wire system of the hand brake will relax and you will not pass the technical control or you may well feel that it truly is no longer blocking your car. To cope with these challenges, we will look at how to adjust the hand brake on your Acura TL . To get this done, first we will see the adjustment of a manual handbrake on Acura TL , then simply, in a second step, how to adjust an automatic handbrake, and ultimately the price of the service performed by a professional.
Adjusting a manual handbrake on Acura TL?
Therefore we start out our article with the hand brake adjustment of a Acura TL in its manual version. This version works in a simple way having a system of wire and screws that allow you to control the tension of the device and so to modify the stroke of the lever of the handbrake. To act on it you will need to act on these kinds of screws to be able to stretch the handbrake cable of the Acura TL . In any case, before adjusting the hand brake, you must be sure your rear end wheels aren’t blocked throughout the adjustment. Please find under the detailed procedure to carry out this intervention:
- In the level of the handbrake, remove the plastic console that protects it using the torx screws and clips.
- Once completed, you should find out a trapdoor on your handbrake, open it to see the screw and wire system.
- You will need to locate the locknuts and loosen them with a wrench tool to allow you to replace the cable pressure.
- Now screw on the lock nuts upon both sides, make sure to make the same changes upon both sides to hold a balanced brake, and be sure the hand brake lever of your Acura TL has a stroke of about three notches.
- Tighten up the locknuts and test out the fastening of the wheels of your car, if it’s very good you can reassemble the set, otherwise tighten up again the tightening screws until you get a great optimum setting
.
If you don’t have access to the handbrake flap of the Acura TL, the adjustment will be precisely the same however it will be done by passing below your car with the level of the handbrake lever. Be sure to place your car on the stand before any actions.
How do I adjust the automatic handbrake of my Acura TL?
Second system of handbrake adjustment upon Acura TL , this is an automatic handbrake, contrary to the manual one, this is done directly on the brake drums or calipers, and is also imagined to adjust automatically for the wear of the brake shoes or disc brake pads. It may be that if you soon have to buy brake pads, the handbrake will lose power, listed below are the steps for taking to examine if the strain of your handbrake is the right one:
- Realize that an automatic handbrake can not be adjusted directly because it is likely to adapt on its own to the have on of the disc brake pads or shoes of your Acura TL.
- You can still examine that the system is operating correctly simply by putting the car on the stand and examining by driving under the car that the disc brake pads are still in good working order.
- For drum brakes it will probably be required to disassemble the brake systems to examine your the shoes, we all encourage you to have it achieved by a specialist.
- Make sure to replace your disc brake pads if you need to.
What is the cost of adjusting the handbrake of Acura TL by a specialist?
Finally, if you do not feel comfortable with this procedure, specifically since it worries a safety component of your car, namely the adjustment of the handbrake of the Acura TL , we give you advice to go to a motor mechanic who can adjust the handbrake for a about fifty local currency . When you have problems with vibrations when braking on Acura TL, do not wait to refer to our article which relates to this issue.
To get more tips on the Acura TL, take a look at the Acura TL category.
