Your car’s handbrake is a obligatory protection feature according to the highway code, in fact , it aims to end your Acura ILX, even over a slight slope. It must be independent of the main brake controls. It is also possible that after a while the cable system of the hand brake will loosen up and you will not pass the technical control or you may well feel that it really is no longer blocking your car. To address these complications, we will look at how to adjust the hand brake on your Acura ILX . To get this done, first we will see the adjustment of a manual handbrake on Acura ILX , in that case, in a second step, how to adjust an automatic handbrake, and then finally the price of the service performed by a professional.
Adjusting a manual handbrake on Acura ILX?
So we start our content with the hand brake adjustment of a Acura ILX in its manual version. This version works in a simple way with a system of cable and screws that allow you to manage the tension of the device and so to modify the stroke of the lever of the handbrake. To act on it you will need to act on these screws in order to expand the handbrake cable of the Acura ILX . In any case, before adjusting the hand brake, you must be sure your rear wheels aren’t blocked throughout the adjustment. Make sure you find under the detailed method to carry out this intervention:
- In the level of your handbrake, remove the plastic console that covers it using the torx screws and clips.
- Once performed, you should discover a trapdoor on your handbrake, open it to see the screw and cable system.
- You need to locate the locknuts and loosen them with a wrench to allow you to change the cable pressure.
- Now screw on the lock nuts on both sides, be sure to make the comparable changes upon both sides to keep a balanced brake, and be sure the hand brake handle of your Acura ILX has a stroke of about three notches.
- Tighten up the locknuts and test the fastening of the tires of your car, if it’s good you can reassemble the set, otherwise tighten up again the tightening screws until you get a great optimum setting
.
If you don’t have access to the handbrake flap of the Acura ILX, the adjustment will probably be precisely the same but it really will be done by passing below your car with the level of your handbrake handle. Remember to put your car on the stand before any action.
How do I adjust the automatic handbrake of my personal Acura ILX?
Second system of handbrake adjustment on Acura ILX , this is an automatic handbrake, unlike the manual one, this is done on the brake drums or calipers, and is imagined to adjust automatically to the wear of the brake shoes or pads. It may be that if you before long have to acquire brake pads, your handbrake will suffer power, here are the steps to consider to check if the tension of your handbrake is the appropriate one:
- Realize that an automatic handbrake can’t be adjusted straight because it is supposed to adapt by itself to the have on of the pads or shoes of your Acura ILX.
- You can even now check that the system is functioning correctly by putting your vehicle on the stand and examining by driving under the car that the pads are still in good working order.
- For drum brakes it can be necessary to take apart the tires to check the state of the shoes, all of us suggest you to have it achieved by a professional.
- Remember to change your pads if you need to.
What is the price of adjusting the handbrake of Acura ILX by a professional?
Finally, if you do not feel comfortable with this procedure, specifically since it fears a safety element of your car, namely the adjustment of the handbrake of the Acura ILX , we give you advice to go to a repair shop who are able to adjust your handbrake for any about fifty local currency . When you have problems with vibrations when braking on Acura ILX, do not wait to consult our content which deals with this problem.
If perhaps you have any further questions about the Acura ILX, do not hesitate to consult our Acura ILX category.
