Regardless whether you feel you can’t see good enough during the night, whether you feel you’re lighting too low or too high, in all of these cases, there’s only one component of your motor vehicle to blame – your low beams. Despite the fact this correction may seem to be easy thanks to the thumbwheel on your dashboard, a whole correction is much more complicated than this simple realignment, and in this article content, we will discover how to adjust the low beam lights of your volvo xc70? For this, first of all we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your volvo xc70.
Why adjust the low beam lights of your volvo xc70?
So let’s start our article content with the point of adjusting the low beam lights of your volvo xc70. For a lot of people these lights are well enough adjusted, and it seems that they light up enough at night. However this is not automatically the case and checking this setting, either because the low beams of your volvo xc70 are not lighting up well, or because you have the feeling that they are too weak or too strong is a wise decision .
Adjusting the low beam of your volvo xc70 for safety is a wise decision.
To begin, the adjusting of the dipped headlights of an volvo xc70 must be done for a elementary safety cause. Regardless it’s for you, or for the other drivers you encounter during your night journeys. In reality, if you don’t see enough, the risk is to fail to see an obstacle on the route, or to anticipate a curve badly. On the other hand, if your lights are too strong, you risk dazzling the car owners in front of you, and thus putting yourself in danger. It is subsequently necessary for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an volvo xc70 for law motives
Moreover to safety, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a volvo xc70?
We will now move on to the section that interests you the most in this article content, how to adjust the low beams of his volvo xc70? This setting may appear to be a bit complicated, but if you follow the recommendations you should be able to do it without too much issue.
Preparations to set the low beam of a volvo xc70
Firstly, you will need to set up your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your motor vehicle on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the motor vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his volvo xc70
Once your motor vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your volvo xc70 (they are in most cases marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once complete, check that the low beam setting of your volvo xc70 is consistent on the road, do not be reluctant to check that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your volvo xc70, please go through our article content on this subject.
If you have any additional questions about the volvo xc70, do not hesitate to consult our volvo xc70 category.
