Regardless you feel you can’t see as well after dark, whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one part of your automobile to blame – your low beams. Despite the fact this correction may seem easy thanks to the thumbwheel on your dashboard, a full correction is much more complicated than this ordinary modification, and in this article content, we will discover how to adjust the low beam lights of your Volvo V50? For this, first of all we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Volvo V50.
Why adjust the low beam lights of your Volvo V50?
So let’s commence our article content with the interest of adjusting the low beam lights of your Volvo V50. For most of us these lights are good enough adjusted, and it looks like that they light up enough at night. Unfortunately this is not automatically the case and checking out this setting, either because the low beams of your Volvo V50 are not illuminating well, or because you have the sense that they are too low or too powerful is a good idea .
Adjusting the low beam of your Volvo V50 for security is a good idea.
Firstly, the adjusting of the dipped headlights of an Volvo V50 must be done for a simple security cause. It doesn’t matter if it’s for you, or for the other users you encounter during your night journeys. In fact, if you don’t see enough, the risk is to fail to see an obstacle on the route, or to anticipate a curve badly. However, if your lights are too powerful, you risk dazzling the car owners in front of you, and thus putting yourself in danger. It is therefore imperative for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Volvo V50 for law reasons
Moreover to security, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Volvo V50?
We will now go forward to the section that concerns you the more in this article content, how to adjust the low beams of his Volvo V50? This setting may seem a bit difficult, but if you follow the guidelines you should be able to do it without too much problem.
Preparations to set the low beam of a Volvo V50
To start, you will need to prepare your automobile to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your automobile on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure carefully.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Volvo V50
Once your automobile is set up, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your automobile up to a distance of between 7 and 10 metres. For the rest of the procedure here are the simple steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Volvo V50 (they are in most cases marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once accomplished, verify that the low beam setting of your Volvo V50 is consistent on the road, do not hesitate to verify that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Volvo V50, please examine our article content on this subject.
If perhaps you have any additional questions about the Volvo V50, do not hesitate to consult our Volvo V50 category.
