Regardless whether you feel you can’t see good enough after dark, regardless whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one part of your car to blame – your low beams. Although this adjustment may seem simple thanks to the thumbwheel on your dashboard, a full adjustment is much more complicated than this common manipulation, and in this article, we will discover how to adjust the low beam lights of your Volvo S60? For this, first we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Volvo S60.
Why adjust the low beam lights of your Volvo S60?
So let’s start our article with the point of adjusting the low beam lights of your Volvo S60. For the majority of us these lights are well enough adjusted, and it looks like that they light up enough at night. Sadly this is not automatically the case and checking this setting, either because the low beams of your Volvo S60 are not lighting up well, or because you have the sense that they are too weak or too strong is a good plan .
Adjusting the low beam of your Volvo S60 for safety is a good plan.
Firstly, the adjusting of the dipped headlights of an Volvo S60 must be done for a simple safety purpose. Regardless whether it’s for you, or for the other drivers you come across during your night trips. In reality, if you don’t see enough, the real danger is to fail to see an obstacle on the route, or to predict a curve badly. Alternatively, if your lights are too strong, you risk dazzling the people in front of you, and thus putting yourself at risk. It is therefore imperative for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Volvo S60 for law motives
Moreover to safety, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another regulation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Volvo S60?
We will now go forward to the part that concerns you the most in this article, how to adjust the low beams of his Volvo S60? This setting may seem to be a bit difficult, but if you follow the instructions you should be able to do it without too much difficulty.
Preparations to set the low beam of a Volvo S60
To start, you will need to prepare your car to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure rigorously.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the car, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Volvo S60
Once your car is in position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the basic steps to follow:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Volvo S60 (they are generally marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the manipulation.
- Using the screws to make the horizontal manipulation, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once accomplished, examine that the low beam setting of your Volvo S60 is consistent on the road, do not be reluctant to examine that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Volvo S60, please examine our article on this subject.
If you have any additional questions about the Volvo S60, do not hesitate to consult our Volvo S60 category.
