Regardless you feel you can’t see as well during the night, whether you feel you’re lighting too low or too high, in all of these cases, there’s only one component of your motor vehicle to blame – your low beams. Despite the fact this correction may look easy thanks to the thumbwheel on your dashboard, a whole correction is much more complicated than this simple manipulation, and in this article content, we will discover how to adjust the low beam lights of your Volkswagen Tiguan? For this, first we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Volkswagen Tiguan.
Why set the low beam lights of your Volkswagen Tiguan?
So let’s start our article content with the interest of adjusting the low beam lights of your Volkswagen Tiguan. For the majority of us these lights are good enough adjusted, and it looks like that they light up enough at night. Unfortunately this is not automatically the case and verifying this setting, either because the low beams of your Volkswagen Tiguan are not illuminating well, or because you have the sense that they are too low or too strong is a wise decision .
Adjusting the low beam of your Volkswagen Tiguan for security is a wise decision.
To start, the adjusting of the dipped headlights of an Volkswagen Tiguan must be done for a basic security cause. It doesn’t matter if it’s for you, or for the other drivers you come across during your night trips. In fact, if you don’t see enough, the risk is to fail to see an obstacle on the route, or to anticipate a curve badly. On the contrary, if your lights are too strong, you risk dazzling the car owners in front of you, and thus putting yourself in danger. It is consequently essential for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Volkswagen Tiguan for law justifications
In addition to security, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another regulation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Volkswagen Tiguan?
We will now move on to the part that interests you the most in this article content, how to adjust the low beams of his Volkswagen Tiguan? This setting may seem a bit complicated, but if you stick to the instructions you should be able to do it without too much difficulty.
Preparations to set the low beam of a Volkswagen Tiguan
First of all, you will need to prepare your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your motor vehicle on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure carefully.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the motor vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Volkswagen Tiguan
Once your motor vehicle is set up, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the simple steps to stick to:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Volkswagen Tiguan (they are commonly marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once completed, examine that the low beam setting of your Volkswagen Tiguan is consistent on the road, do not hesitate to examine that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Volkswagen Tiguan, please go through our article content on this subject.
To get more tips on the Volkswagen Tiguan, take a look at the Volkswagen Tiguan category.
