Whether you feel you can’t see good enough at nighttime, regardless whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one part of your vehicle to blame – your low beams. Even though this correction may seem to be easy thanks to the thumbwheel on your dashboard, a full correction is much more technical than this ordinary realignment, and in this document, we will find out how to adjust the low beam lights of your Volkswagen T-roc? For this, first of all we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Volkswagen T-roc.
Why set the low beam lights of your Volkswagen T-roc?
So let’s commence our document with the point of adjusting the low beam lights of your Volkswagen T-roc. For a lot of people these lights are good enough adjusted, and it looks like that they light up enough at night. Sadly this is not always the case and looking at this setting, either because the low beams of your Volkswagen T-roc are not lighting up well, or because you have the feeling that they are too low or too strong is a good idea .
Adjusting the low beam of your Volkswagen T-roc for security is a good idea.
Firstly, the adjusting of the dipped headlights of an Volkswagen T-roc must be done for a basic security purpose. It doesn’t matter if it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the real danger is to fail to see an obstacle on the route, or to predict a curve badly. On the contrary, if your lights are too strong, you risk dazzling the car owners in front of you, and thus putting yourself in danger. It is subsequently important for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Volkswagen T-roc for legal justifications
Additionally to security, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another regulation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Volkswagen T-roc?
We will now move on to the part that concerns you the more in this document, how to adjust the low beams of his Volkswagen T-roc? This setting may seem a bit difficult, but if you stick to the guidelines you should be able to do it without too much issue.
Preparations to set the low beam of a Volkswagen T-roc
To start, you will need to set up your vehicle to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your vehicle on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure rigorously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Volkswagen T-roc
Once your vehicle is in position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the operation here are the simple steps to stick to:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Volkswagen T-roc (they are in general marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once accomplished, examine that the low beam setting of your Volkswagen T-roc is consistent on the road, do not hesitate to examine that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Volkswagen T-roc, please browse our document on this subject.
In the event that you have any further questions about the Volkswagen T-roc, do not hesitate to consult our Volkswagen T-roc category.
