It doesn’t matter if you feel you can’t see as well at night, regardless whether you feel you’re lighting too low or too high, in all of these situations, there’s only one part of your vehicle to blame – your low beams. Even though this adjustment may seem easy to do thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this simple modification, and in this article, we will see how to adjust the low beam lights of your Volkswagen T-Cross? For this, first of all we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Volkswagen T-Cross.

set-low-beam-headlights-volkswagen-t-cross

Why adjust the low beam lights of your Volkswagen T-Cross?

So let’s commence our article with the point of adjusting the low beam lights of your Volkswagen T-Cross. For the majority of us these lights are well enough adjusted, and it looks like that they light up enough at night. However this is not automatically the case and verifying this setting, either because the low beams of your Volkswagen T-Cross are not lighting up well, or because you have the sense that they are too low or too powerful is a good option .

Adjusting the low beam of your Volkswagen T-Cross for safety is a good option.

To begin, the adjusting of the dipped headlights of an Volkswagen T-Cross must be done for a ordinary safety reason. Whether it’s for you, or for the other users you encounter during your night trips. In fact, if you don’t see enough, the risk is to miss an obstacle on the route, or to anticipate a curve badly. On the other hand, if your lights are too powerful, you risk dazzling the drivers in front of you, and thus putting yourself in danger. It is subsequently fundamental for others as well as for you to have an optimal setting of your parking lights.

Setting the low beam headlights of an Volkswagen T-Cross for legal justifications

Furthermore to safety, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another regulation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a Volkswagen T-Cross?

We will now move on to the section that concerns you the most in this article, how to adjust the low beams of his Volkswagen T-Cross? This setting may sound a bit complicated, but if you follow the guidelines you should be able to do it without too much issue.

Preparations to set the low beam of a Volkswagen T-Cross

Firstly, you will need to set up your vehicle to adjust your low beam lights in good conditions, here are the preparations to do:

  • Place your vehicle on a area in front of a white wall for example, about 4 or 5 meters from the wall.
  • Examine your tire pressure carefully.
  • Examine that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unneeded weight from the vehicle, only one person should be in the driver’s seat.

The setting of the low beam headlights of his Volkswagen T-Cross

Once your vehicle is in place, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the task here are the basic steps to follow:

  • Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Volkswagen T-Cross (they are almost always marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
  • Use a cloth or anything else to hide the light on which you are not making the adjustment.
  • Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once carried out, verify that the low beam setting of your Volkswagen T-Cross is consistent on the road, do not be reluctant to verify that it has been driven, in some cases it may move.

If you want to adjust the fog lights on your Volkswagen T-Cross, please examine our article on this subject.

To discover more tips on the Volkswagen T-Cross, take a look at the Volkswagen T-Cross category.