It doesn’t matter if you feel you can’t see properly after dark, whether you feel you’re lighting too low or too high, in all of these cases, there’s only one component of your vehicle to blame – your low beams. Although this adjustment may seem easy thanks to the thumbwheel on your dashboard, a full adjustment is much more complex than this common realignment, and in this content, we will find out how to adjust the low beam lights of your Volkswagen Polo? For this, first of all we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Volkswagen Polo.
Why set the low beam lights of your Volkswagen Polo?
So let’s start our content with the benefit of adjusting the low beam lights of your Volkswagen Polo. For a lot of people these lights are well enough adjusted, and it seems that they light up enough at night. However this is not automatically the case and checking out this setting, either because the low beams of your Volkswagen Polo are not lighting up well, or because you have the feeling that they are too low or too powerful is a good plan .
Adjusting the low beam of your Volkswagen Polo for security is a good plan.
To start, the adjusting of the dipped headlights of an Volkswagen Polo must be done for a simple security cause. Whether it’s for you, or for the other users you come across during your night journeys. Indeed, if you don’t see enough, the risk is to miss an obstacle on the road, or to predict a curve badly. On the contrary, if your lights are too powerful, you risk dazzling the people in front of you, and thus putting yourself at risk. It is consequently crucial for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Volkswagen Polo for law motives
Moreover to security, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another law supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Volkswagen Polo?
We will now move on to the section that concerns you the more in this content, how to adjust the low beams of his Volkswagen Polo? This setting may appear to be a bit difficult, but if you follow the recommendations you should be able to do it without too much issue.
Preparations to set the low beam of a Volkswagen Polo
To start, you will need to set up your vehicle to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure cautiously.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Volkswagen Polo
Once your vehicle is into position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the basic steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Volkswagen Polo (they are commonly marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once completed, verify that the low beam setting of your Volkswagen Polo is consistent on the road, do not hesitate to verify that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Volkswagen Polo, please read our content on this subject.
To get more tips on the Volkswagen Polo, take a look at the Volkswagen Polo category.
