Regardless whether you feel you can’t see good enough at nighttime, regardless you feel you’re lighting too low or too high, in all of these situations, there’s only one part of your vehicle to blame – your low beams. Despite the fact this adjustment may look easy to do thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this ordinary modification, and in this document, we will find out how to adjust the low beam lights of your Volkswagen Polo 6? For this, first we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Volkswagen Polo 6.

set-low-beam-headlights-volkswagen-polo-6

Why set the low beam lights of your Volkswagen Polo 6?

So let’s commence our document with the benefit of adjusting the low beam lights of your Volkswagen Polo 6. For most people these lights are well enough adjusted, and it seems that they light up enough at night. Unfortunately this is not necessarily the case and looking at this setting, either because the low beams of your Volkswagen Polo 6 are not illuminating well, or because you have the feeling that they are too weak or too strong is a good plan .

Adjusting the low beam of your Volkswagen Polo 6 for security is a good plan.

To start, the adjusting of the dipped headlights of an Volkswagen Polo 6 must be done for a basic security cause. Whether it’s for you, or for the other drivers you come across during your night trips. In reality, if you don’t see enough, the risk is to fail to see an obstacle on the route, or to predict a curve badly. Alternatively, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is therefore fundamental for others as well as for you to have an ideal setting of your parking lights.

Setting the low beam headlights of an Volkswagen Polo 6 for legal reasons

Additionally to security, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a Volkswagen Polo 6?

We will now move on to the part that concerns you the most in this document, how to adjust the low beams of his Volkswagen Polo 6? This setting may sound a bit complicated, but if you follow the recommendations you should be able to do it without too much difficulty.

Preparations to set the low beam of a Volkswagen Polo 6

First of all, you will need to set up your vehicle to adjust your low beam lights in good conditions, here are the preparations to do:

  • Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Examine your tire pressure rigorously.
  • Examine that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unneeded weight from the vehicle, only one person should be in the driver’s seat.

The setting of the low beam headlights of his Volkswagen Polo 6

Once your vehicle is into position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the operation here are the simple steps to follow:

  • Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Volkswagen Polo 6 (they are usually marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
  • Use a cloth or some thing else to hide the light on which you are not making the modification.
  • Using the screws to make the horizontal modification, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once accomplished, verify that the low beam setting of your Volkswagen Polo 6 is consistent on the road, do not hesitate to verify that it has been driven, in some cases it may move.

If you want to adjust the fog lights on your Volkswagen Polo 6, please read our document on this subject.

If you need more tutorials on the Volkswagen Polo 6, go to our Volkswagen Polo 6 category.