Whether you feel you can’t see good enough at night, whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one component of your motor vehicle to blame – your low beams. Despite the fact this correction may look easy thanks to the thumbwheel on your dashboard, a complete correction is much more complex than this basic realignment, and in this article content, we will find out how to adjust the low beam lights of your Volkswagen Polo 4? For this, first we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Volkswagen Polo 4.
Why adjust the low beam lights of your Volkswagen Polo 4?
So let’s begin our article content with the interest of adjusting the low beam lights of your Volkswagen Polo 4. For most people these lights are sufficiently adjusted, and it looks like that they light up enough at night. Sadly this is not constantly the case and examining this setting, either because the low beams of your Volkswagen Polo 4 are not lighting up well, or because you have the feeling that they are too weak or too strong is a good option .
Adjusting the low beam of your Volkswagen Polo 4 for safety is a good option.
To start, the adjusting of the dipped headlights of an Volkswagen Polo 4 must be done for a basic safety cause. It doesn’t matter if it’s for you, or for the other users you encounter during your night trips. Indeed, if you don’t see enough, the risk is to miss an obstacle on the road, or to anticipate a curve badly. In contrast, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is subsequently crucial for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Volkswagen Polo 4 for law reasons
Moreover to safety, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another regulation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Volkswagen Polo 4?
We will now move on to the section that interests you the more in this article content, how to adjust the low beams of his Volkswagen Polo 4? This setting may sound a bit complex, but if you stick to the recommendations you should be able to do it without too much difficulty.
Preparations to set the low beam of a Volkswagen Polo 4
Firstly, you will need to prepare your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your motor vehicle on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure precisely.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the motor vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Volkswagen Polo 4
Once your motor vehicle is into position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the task here are the guidelines to stick to:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Volkswagen Polo 4 (they are generally marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once completed, verify that the low beam setting of your Volkswagen Polo 4 is consistent on the road, do not hesitate to verify that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Volkswagen Polo 4, please go through our article content on this subject.
If you want more guides on the Volkswagen Polo 4, go to our Volkswagen Polo 4 category.
