Regardless whether you feel you can’t see properly after dark, regardless you feel you’re lighting too low or too high, in all of these circumstances, there’s only one component of your automobile to blame – your low beams. Despite the fact this correction may seem simple thanks to the thumbwheel on your dashboard, a full correction is much more complicated than this ordinary realignment, and in this content, we will discover how to adjust the low beam lights of your Volkswagen New Beetle? For this, first we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Volkswagen New Beetle.


Why set the low beam lights of your Volkswagen New Beetle?

So let’s commence our content with the point of adjusting the low beam lights of your Volkswagen New Beetle. For most people these lights are sufficiently adjusted, and it seems that they light up enough at night. Sadly this is not constantly the case and checking this setting, either because the low beams of your Volkswagen New Beetle are not illuminating well, or because you have the sense that they are too low or too powerful is a wise decision .

Adjusting the low beam of your Volkswagen New Beetle for security is a wise decision.

First of all, the adjusting of the dipped headlights of an Volkswagen New Beetle must be done for a basic security reason. Whether it’s for you, or for the other users you encounter during your night trips. Indeed, if you don’t see enough, the risk is to miss an obstacle on the road, or to anticipate a curve badly. On the flip side, if your lights are too powerful, you risk dazzling the car owners in front of you, and thus putting yourself at risk. It is as a consequence imperative for others as well as for you to have an optimal setting of your parking lights.

Setting the low beam headlights of an Volkswagen New Beetle for law reasons

Moreover to security, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a Volkswagen New Beetle?

We will now move on to the part that concerns you the most in this content, how to adjust the low beams of his Volkswagen New Beetle? This setting may appear a bit complicated, but if you follow the instructions you should be able to do it without too much problem.

Preparations to set the low beam of a Volkswagen New Beetle

To start, you will need to prepare your automobile to adjust your low beam lights in good conditions, here are the preparations to do:

  • Place your automobile on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
  • Examine your tire pressure precisely.
  • Examine that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all needless weight from the automobile, only one person should be in the driver’s seat.

The setting of the low beam headlights of his Volkswagen New Beetle

Once your automobile is set up, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your automobile up to a distance of between 7 and 10 metres. For the rest of the operation here are the basic steps to follow:

  • Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Volkswagen New Beetle (they are in most cases marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
  • Use a cloth or something else to hide the light on which you are not making the adjustment.
  • Using the screws to make the horizontal adjustment, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once complete, verify that the low beam setting of your Volkswagen New Beetle is consistent on the road, do not hesitate to verify that it has been driven, sometimes it may move.

If you want to adjust the fog lights on your Volkswagen New Beetle, please read our content on this subject.

To find more tips on the Volkswagen New Beetle, take a look at the Volkswagen New Beetle category.