Whether you feel you can’t see properly during the night, regardless whether you feel you’re lighting too low or too high, in all of these situations, there’s only one part of your automobile to blame – your low beams. Although this adjustment may seem easy to do thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this basic manipulation, and in this article content, we will see how to adjust the low beam lights of your Volkswagen ID.3? For this, first we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Volkswagen ID.3.

set-low-beam-headlights-volkswagen-id3

Why set the low beam lights of your Volkswagen ID.3?

So let’s begin our article content with the advantage of adjusting the low beam lights of your Volkswagen ID.3. For most of us these lights are well enough adjusted, and it seems that they light up enough at night. However this is not automatically the case and looking at this setting, either because the low beams of your Volkswagen ID.3 are not lighting up well, or because you have the feeling that they are too low or too powerful is a good idea .

Adjusting the low beam of your Volkswagen ID.3 for safety is a good idea.

To begin, the adjusting of the dipped headlights of an Volkswagen ID.3 must be done for a ordinary safety cause. It doesn’t matter if it’s for you, or for the other drivers you come across during your night trips. In reality, if you don’t see enough, the risk is to miss an obstacle on the route, or to anticipate a curve badly. Alternatively, if your lights are too powerful, you risk dazzling the car owners in front of you, and thus putting yourself in danger. It is therefore fundamental for others as well as for you to have an optimal setting of your parking lights.

Setting the low beam headlights of an Volkswagen ID.3 for law motives

Moreover to safety, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a Volkswagen ID.3?

We will now move on to the section that concerns you the more in this article content, how to adjust the low beams of his Volkswagen ID.3? This setting may appear a bit complex, but if you follow the recommendations you should be able to do it without too much problem.

Preparations to set the low beam of a Volkswagen ID.3

To start, you will need to set up your automobile to adjust your low beam lights in good conditions, here are the preparations to apply:

  • Place your automobile on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
  • Verify your tire pressure carefully.
  • Verify that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unneeded weight from the automobile, only one person should be in the driver’s seat.

The setting of the low beam headlights of his Volkswagen ID.3

Once your automobile is in place, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your automobile up to a distance of between 7 and 10 metres. For the rest of the process here are the simple steps to follow:

  • Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Volkswagen ID.3 (they are almost always marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
  • Use a cloth or some thing else to hide the light on which you are not making the manipulation.
  • Using the screws to make the horizontal manipulation, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once finished, verify that the low beam setting of your Volkswagen ID.3 is consistent on the road, do not be reluctant to verify that it has been driven, sometimes it may move.

If you want to adjust the fog lights on your Volkswagen ID.3, please go through our article content on this subject.

If you have any further questions about the Volkswagen ID.3, do not hesitate to consult our Volkswagen ID.3 category.