Regardless whether you feel you can’t see properly after dark, regardless you feel you’re lighting too low or too high, in all of these circumstances, there’s only one component of your vehicle to blame – your low beams. Even though this correction may seem simple thanks to the thumbwheel on your dashboard, a whole correction is much more technical than this common realignment, and in this article content, we will see how to adjust the low beam lights of your Volkswagen Fox? For this, first of all we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Volkswagen Fox.


Why set the low beam lights of your Volkswagen Fox?

So let’s begin our article content with the point of adjusting the low beam lights of your Volkswagen Fox. For most of us these lights are sufficiently adjusted, and it looks like that they light up enough at night. Sadly this is not necessarily the case and verifying this setting, either because the low beams of your Volkswagen Fox are not illuminating well, or because you have the sense that they are too low or too strong is a good idea .

Adjusting the low beam of your Volkswagen Fox for safety is a good idea.

First of all, the adjusting of the dipped headlights of an Volkswagen Fox must be done for a basic safety purpose. Whether it’s for you, or for the other users you encounter during your night journeys. In reality, if you don’t see enough, the real danger is to fail to see an obstacle on the route, or to predict a curve badly. On the other hand, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is consequently essential for others as well as for you to have an ideal setting of your parking lights.

Setting the low beam headlights of an Volkswagen Fox for legal motives

Moreover to safety, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another law supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a Volkswagen Fox?

We will now go forward to the part that concerns you the more in this article content, how to adjust the low beams of his Volkswagen Fox? This setting may seem a bit complex, but if you stick to the recommendations you should be able to do it without too much problem.

Preparations to set the low beam of a Volkswagen Fox

First of all, you will need to set up your vehicle to adjust your low beam lights in good conditions, here are the preparations to put in place:

  • Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Verify your tire pressure cautiously.
  • Verify that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unneeded weight from the vehicle, only one person should be in the driver’s seat.

The setting of the low beam headlights of his Volkswagen Fox

Once your vehicle is in place, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the task here are the steps to stick to:

  • Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Volkswagen Fox (they are usually marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
  • Use a cloth or anything else to hide the light on which you are not making the adjustment.
  • Using the screws to make the horizontal adjustment, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once accomplished, check that the low beam setting of your Volkswagen Fox is consistent on the road, do not be reluctant to check that it has been driven, sometimes it may move.

If you want to adjust the fog lights on your Volkswagen Fox, please read our article content on this subject.

In the event that you have any further questions about the Volkswagen Fox, do not hesitate to consult our Volkswagen Fox category.