It doesn’t matter if you feel you can’t see as well at nighttime, whether you feel you’re lighting too low or too high, in all of these occasions, there’s only one component of your car to blame – your low beams. Although this correction may seem to be simple thanks to the thumbwheel on your dashboard, a complete correction is much more technical than this basic manipulation, and in this article, we will see how to adjust the low beam lights of your Volkswagen CC? For this, first we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Volkswagen CC.
Why adjust the low beam lights of your Volkswagen CC?
So let’s start our article with the benefit of adjusting the low beam lights of your Volkswagen CC. For many of us these lights are good enough adjusted, and it looks like that they light up enough at night. However this is not always the case and examining this setting, either because the low beams of your Volkswagen CC are not lighting up well, or because you have the sense that they are too weak or too powerful is a good plan .
Adjusting the low beam of your Volkswagen CC for safety is a good plan.
To start, the adjusting of the dipped headlights of an Volkswagen CC must be done for a ordinary safety purpose. Regardless it’s for you, or for the other drivers you come across during your night journeys. In fact, if you don’t see enough, the risk is to fail to see an obstacle on the road, or to anticipate a curve badly. Alternatively, if your lights are too powerful, you risk dazzling the car owners in front of you, and thus putting yourself in danger. It is consequently fundamental for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Volkswagen CC for law motives
In addition to safety, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another law supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Volkswagen CC?
We will now move on to the part that concerns you the more in this article, how to adjust the low beams of his Volkswagen CC? This setting may seem to be a bit complicated, but if you stick to the recommendations you should be able to do it without too much problem.
Preparations to set the low beam of a Volkswagen CC
Firstly, you will need to set up your car to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your car on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure cautiously.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the car, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Volkswagen CC
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your car up to a distance of between 7 and 10 metres. For the rest of the operation here are the steps to stick to:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Volkswagen CC (they are commonly marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the manipulation.
- Using the screws to make the horizontal manipulation, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once carried out, check that the low beam setting of your Volkswagen CC is consistent on the road, do not hesitate to check that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Volkswagen CC, please read our article on this subject.
Whenever you have any additional questions about the Volkswagen CC, do not hesitate to consult our Volkswagen CC category.
