Regardless whether you feel you can’t see as well through the night, regardless whether you feel you’re lighting too low or too high, in all of these situations, there’s only one component of your automobile to blame – your low beams. Despite the fact this correction may look easy thanks to the thumbwheel on your dashboard, a full correction is much more complicated than this simple modification, and in this content, we will find out how to adjust the low beam lights of your Volkswagen Caddy? For this, first of all we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Volkswagen Caddy.
Why adjust the low beam lights of your Volkswagen Caddy?
So let’s begin our content with the benefit of adjusting the low beam lights of your Volkswagen Caddy. For many people these lights are well enough adjusted, and it looks like that they light up enough at night. However this is not necessarily the case and verifying this setting, either because the low beams of your Volkswagen Caddy are not lighting up well, or because you have the sense that they are too weak or too powerful is a good option .
Adjusting the low beam of your Volkswagen Caddy for security is a good option.
Firstly, the adjusting of the dipped headlights of an Volkswagen Caddy must be done for a simple security cause. Regardless whether it’s for you, or for the other drivers you encounter during your night journeys. In reality, if you don’t see enough, the real danger is to fail to see an obstacle on the road, or to predict a curve badly. Alternatively, if your lights are too powerful, you risk dazzling the drivers in front of you, and thus putting yourself in danger. It is consequently important for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Volkswagen Caddy for law motives
In addition to security, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another law regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Volkswagen Caddy?
We will now go forward to the section that interests you the more in this content, how to adjust the low beams of his Volkswagen Caddy? This setting may appear a bit complex, but if you stick to the instructions you should be able to do it without too much problem.
Preparations to set the low beam of a Volkswagen Caddy
Firstly, you will need to set up your automobile to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your automobile on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure rigorously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Volkswagen Caddy
Once your automobile is set up, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your automobile up to a distance of between 7 and 10 metres. For the rest of the process here are the simple steps to stick to:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Volkswagen Caddy (they are in most cases marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once complete, check that the low beam setting of your Volkswagen Caddy is consistent on the road, do not be reluctant to check that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Volkswagen Caddy, please browse our content on this subject.
To discover more tips on the Volkswagen Caddy, take a look at the Volkswagen Caddy category.
