It doesn’t matter if you feel you can’t see properly at night, whether you feel you’re lighting too low or too high, in all of these cases, there’s only one component of your motor vehicle to blame – your low beams. Even though this adjustment may look easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this basic modification, and in this article content, we will see how to adjust the low beam lights of your Volkswagen Beetle? For this, first of all we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Volkswagen Beetle.
Why set the low beam lights of your Volkswagen Beetle?
So let’s start our article content with the interest of adjusting the low beam lights of your Volkswagen Beetle. For many of us these lights are sufficiently adjusted, and it looks like that they light up enough at night. Sadly this is not always the case and checking out this setting, either because the low beams of your Volkswagen Beetle are not lighting up well, or because you have the sense that they are too low or too strong is a wise decision .
Adjusting the low beam of your Volkswagen Beetle for security is a wise decision.
To begin, the adjusting of the dipped headlights of an Volkswagen Beetle must be done for a basic security reason. It doesn’t matter if it’s for you, or for the other drivers you encounter during your night trips. In reality, if you don’t see enough, the real danger is to fail to see an obstacle on the road, or to anticipate a curve badly. Alternatively, if your lights are too strong, you risk dazzling the people in front of you, and thus putting yourself at risk. It is as a consequence essential for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Volkswagen Beetle for legal justifications
Moreover to security, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Volkswagen Beetle?
We will now go forward to the part that concerns you the most in this article content, how to adjust the low beams of his Volkswagen Beetle? This setting may seem a bit difficult, but if you stick to the guidelines you should be able to do it without too much issue.
Preparations to set the low beam of a Volkswagen Beetle
To start, you will need to set up your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your motor vehicle on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure rigorously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the motor vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Volkswagen Beetle
Once your motor vehicle is in place, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the simple steps to stick to:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Volkswagen Beetle (they are commonly marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once complete, verify that the low beam setting of your Volkswagen Beetle is consistent on the road, do not hesitate to verify that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Volkswagen Beetle, please go through our article content on this subject.
In the event that you have any further questions about the Volkswagen Beetle, do not hesitate to consult our Volkswagen Beetle category.
