It doesn’t matter if you feel you can’t see good enough during the night, regardless you feel you’re lighting too low or too high, in all of these occasions, there’s only one part of your car to blame – your low beams. Despite the fact this adjustment may appear easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complicated than this common manipulation, and in this content, we will see how to adjust the low beam lights of your Volkswagen Atlas? For this, first we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Volkswagen Atlas.
Why set the low beam lights of your Volkswagen Atlas?
So let’s begin our content with the benefit of adjusting the low beam lights of your Volkswagen Atlas. For the majority of us these lights are well enough adjusted, and it seems that they light up enough at night. Unfortunately this is not constantly the case and checking out this setting, either because the low beams of your Volkswagen Atlas are not lighting up well, or because you have the feeling that they are too weak or too strong is a wise decision .
Adjusting the low beam of your Volkswagen Atlas for security is a wise decision.
First of all, the adjusting of the dipped headlights of an Volkswagen Atlas must be done for a ordinary security cause. Regardless whether it’s for you, or for the other users you come across during your night journeys. In reality, if you don’t see enough, the risk is to fail to see an obstacle on the road, or to predict a curve badly. On the contrary, if your lights are too strong, you risk dazzling the people in front of you, and thus putting yourself at risk. It is therefore necessary for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Volkswagen Atlas for legal reasons
In addition to security, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Volkswagen Atlas?
We will now move on to the section that interests you the more in this content, how to adjust the low beams of his Volkswagen Atlas? This setting may sound a bit complex, but if you stick to the recommendations you should be able to do it without too much problem.
Preparations to set the low beam of a Volkswagen Atlas
Firstly, you will need to prepare your car to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your car on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure carefully.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the car, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Volkswagen Atlas
Once your car is into position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your car up to a distance of between 7 and 10 metres. For the rest of the operation here are the basic steps to stick to:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Volkswagen Atlas (they are in general marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once done, check that the low beam setting of your Volkswagen Atlas is consistent on the road, do not be reluctant to check that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Volkswagen Atlas, please read our content on this subject.
In the event that you have any further questions about the Volkswagen Atlas, do not hesitate to consult our Volkswagen Atlas category.
