Regardless you feel you can’t see properly at nighttime, whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one component of your automobile to blame – your low beams. Even though this correction may seem easy thanks to the thumbwheel on your dashboard, a complete correction is much more complicated than this basic realignment, and in this document, we will see how to adjust the low beam lights of your Toyota Yaris? For this, first we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Toyota Yaris.

set-low-beam-headlights-toyota-yaris

Why adjust the low beam lights of your Toyota Yaris?

So let’s commence our document with the advantage of adjusting the low beam lights of your Toyota Yaris. For the majority of us these lights are well enough adjusted, and it looks like that they light up enough at night. However this is not constantly the case and checking out this setting, either because the low beams of your Toyota Yaris are not illuminating well, or because you have the sense that they are too weak or too strong is a good idea .

Adjusting the low beam of your Toyota Yaris for safety is a good idea.

To begin, the adjusting of the dipped headlights of an Toyota Yaris must be done for a elementary safety reason. Regardless it’s for you, or for the other drivers you come across during your night journeys. Indeed, if you don’t see enough, the real danger is to miss an obstacle on the route, or to anticipate a curve badly. On the other hand, if your lights are too strong, you risk dazzling the people in front of you, and thus putting yourself at risk. It is therefore imperative for others as well as for you to have an optimal setting of your parking lights.

Setting the low beam headlights of an Toyota Yaris for legal reasons

Additionally to safety, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another law controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a Toyota Yaris?

We will now go forward to the part that concerns you the most in this document, how to adjust the low beams of his Toyota Yaris? This setting may appear to be a bit difficult, but if you stick to the recommendations you should be able to do it without too much difficulty.

Preparations to set the low beam of a Toyota Yaris

To start, you will need to prepare your automobile to adjust your low beam lights in good conditions, here are the preparations to put in place:

  • Place your automobile on a area in front of a white wall for example, about 4 or 5 meters from the wall.
  • Check your tire pressure rigorously.
  • Check that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all needless weight from the automobile, only one person should be in the driver’s seat.

The setting of the low beam headlights of his Toyota Yaris

Once your automobile is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your automobile up to a distance of between 7 and 10 metres. For the rest of the process here are the guidelines to stick to:

  • Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Toyota Yaris (they are usually marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
  • Use a cloth or something else to hide the light on which you are not making the correction.
  • Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once accomplished, check that the low beam setting of your Toyota Yaris is consistent on the road, do not be reluctant to check that it has been driven, sometimes it may move.

If you want to adjust the fog lights on your Toyota Yaris, please go through our document on this subject.

If perhaps you have any further questions about the Toyota Yaris, do not hesitate to consult our Toyota Yaris category.