It doesn’t matter if you feel you can’t see as well at night, whether you feel you’re lighting too low or too high, in all of these situations, there’s only one part of your automobile to blame – your low beams. Even though this adjustment may appear simple thanks to the thumbwheel on your dashboard, a full adjustment is much more complex than this simple manipulation, and in this document, we will see how to adjust the low beam lights of your Toyota Tundra? For this, first of all we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Toyota Tundra.

set-low-beam-headlights-toyota-tundra

Why adjust the low beam lights of your Toyota Tundra?

So let’s start our document with the interest of adjusting the low beam lights of your Toyota Tundra. For the majority of us these lights are sufficiently adjusted, and it seems that they light up enough at night. Sadly this is not constantly the case and verifying this setting, either because the low beams of your Toyota Tundra are not lighting up well, or because you have the sense that they are too low or too powerful is a good option .

Adjusting the low beam of your Toyota Tundra for security is a good option.

First of all, the adjusting of the dipped headlights of an Toyota Tundra must be done for a basic security purpose. Whether it’s for you, or for the other users you encounter during your night trips. In reality, if you don’t see enough, the real danger is to miss an obstacle on the road, or to anticipate a curve badly. On the flip side, if your lights are too powerful, you risk dazzling the car owners in front of you, and thus putting yourself at risk. It is consequently essential for others as well as for you to have an optimal setting of your parking lights.

Setting the low beam headlights of an Toyota Tundra for law motives

Moreover to security, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another legislation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a Toyota Tundra?

We will now go forward to the part that concerns you the most in this document, how to adjust the low beams of his Toyota Tundra? This setting may seem a bit complex, but if you follow the guidelines you should be able to do it without too much problem.

Preparations to set the low beam of a Toyota Tundra

To start, you will need to set up your automobile to adjust your low beam lights in good conditions, here are the preparations to put in place:

  • Place your automobile on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
  • Check your tire pressure precisely.
  • Check that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unneeded weight from the automobile, only one person should be in the driver’s seat.

The setting of the low beam headlights of his Toyota Tundra

Once your automobile is in position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your automobile up to a distance of between 7 and 10 metres. For the rest of the operation here are the steps to follow:

  • Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Toyota Tundra (they are generally marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
  • Use a cloth or something else to hide the light on which you are not making the adjustment.
  • Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once carried out, examine that the low beam setting of your Toyota Tundra is consistent on the road, do not hesitate to examine that it has been driven, on occasion it may move.

If you want to adjust the fog lights on your Toyota Tundra, please examine our document on this subject.

If you want more guides on the Toyota Tundra, go to our Toyota Tundra category.