Regardless whether you feel you can’t see properly during the night, regardless you feel you’re lighting too low or too high, in all of these circumstances, there’s only one component of your motor vehicle to blame – your low beams. Although this adjustment may look simple thanks to the thumbwheel on your dashboard, a full adjustment is much more complicated than this basic manipulation, and in this article, we will find out how to adjust the low beam lights of your Toyota Sequoia? For this, first of all we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Toyota Sequoia.

set-low-beam-headlights-toyota-sequoia

Why adjust the low beam lights of your Toyota Sequoia?

So let’s commence our article with the advantage of adjusting the low beam lights of your Toyota Sequoia. For a lot of people these lights are sufficiently adjusted, and it seems that they light up enough at night. However this is not necessarily the case and examining this setting, either because the low beams of your Toyota Sequoia are not lighting up well, or because you have the sense that they are too low or too powerful is a good idea .

Adjusting the low beam of your Toyota Sequoia for safety is a good idea.

To start, the adjusting of the dipped headlights of an Toyota Sequoia must be done for a ordinary safety cause. Whether it’s for you, or for the other users you encounter during your night journeys. In reality, if you don’t see enough, the risk is to fail to see an obstacle on the road, or to anticipate a curve badly. Alternatively, if your lights are too powerful, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is as a consequence necessary for others as well as for you to have an ideal setting of your parking lights.

Setting the low beam headlights of an Toyota Sequoia for legal justifications

Additionally to safety, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a Toyota Sequoia?

We will now go forward to the part that interests you the more in this article, how to adjust the low beams of his Toyota Sequoia? This setting may appear a bit complicated, but if you stick to the recommendations you should be able to do it without too much difficulty.

Preparations to set the low beam of a Toyota Sequoia

First of all, you will need to set up your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to do:

  • Place your motor vehicle on a area in front of a white wall for example, about 4 or 5 meters from the wall.
  • Verify your tire pressure rigorously.
  • Verify that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unneeded weight from the motor vehicle, only one person should be in the driver’s seat.

The setting of the low beam headlights of his Toyota Sequoia

Once your motor vehicle is set up, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the simple steps to stick to:

  • Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Toyota Sequoia (they are usually marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
  • Use a cloth or anything else to hide the light on which you are not making the adjustment.
  • Using the screws to make the horizontal adjustment, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once complete, verify that the low beam setting of your Toyota Sequoia is consistent on the road, do not be reluctant to verify that it has been driven, sometimes it may move.

If you want to adjust the fog lights on your Toyota Sequoia, please examine our article on this subject.

To find more tips on the Toyota Sequoia, take a look at the Toyota Sequoia category.