It doesn’t matter if you feel you can’t see as well at night, regardless you feel you’re lighting too low or too high, in all of these cases, there’s only one part of your automobile to blame – your low beams. Even though this adjustment may seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this basic modification, and in this content, we will find out how to adjust the low beam lights of your Toyota Prius? For this, first of all we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Toyota Prius.
Why set the low beam lights of your Toyota Prius?
So let’s start our content with the interest of adjusting the low beam lights of your Toyota Prius. For a lot of people these lights are well enough adjusted, and it seems that they light up enough at night. Unfortunately this is not always the case and looking at this setting, either because the low beams of your Toyota Prius are not illuminating well, or because you have the feeling that they are too low or too powerful is a wise decision .
Adjusting the low beam of your Toyota Prius for safety is a wise decision.
To begin, the adjusting of the dipped headlights of an Toyota Prius must be done for a elementary safety purpose. It doesn’t matter if it’s for you, or for the other users you encounter during your night journeys. Indeed, if you don’t see enough, the real danger is to fail to see an obstacle on the route, or to predict a curve badly. However, if your lights are too powerful, you risk dazzling the car owners in front of you, and thus putting yourself at risk. It is consequently necessary for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Toyota Prius for law reasons
Moreover to safety, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another regulation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Toyota Prius?
We will now go forward to the part that interests you the most in this content, how to adjust the low beams of his Toyota Prius? This setting may sound a bit difficult, but if you follow the instructions you should be able to do it without too much issue.
Preparations to set the low beam of a Toyota Prius
First of all, you will need to set up your automobile to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your automobile on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Toyota Prius
Once your automobile is in place, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your automobile up to a distance of between 7 and 10 metres. For the rest of the procedure here are the simple steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Toyota Prius (they are in general marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the low beam setting of your Toyota Prius is consistent on the road, do not hesitate to check that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Toyota Prius, please examine our content on this subject.
In the event that you have any additional questions about the Toyota Prius, do not hesitate to consult our Toyota Prius category.
