Regardless you feel you can’t see good enough after dark, regardless whether you feel you’re lighting too low or too high, in all of these cases, there’s only one component of your vehicle to blame – your low beams. Even though this correction may seem easy thanks to the thumbwheel on your dashboard, a whole correction is much more complex than this common modification, and in this article content, we will find out how to adjust the low beam lights of your Toyota Land Cruiser Serie 70? For this, first we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Toyota Land Cruiser Serie 70.
Why adjust the low beam lights of your Toyota Land Cruiser Serie 70?
So let’s begin our article content with the interest of adjusting the low beam lights of your Toyota Land Cruiser Serie 70. For many of us these lights are good enough adjusted, and it seems that they light up enough at night. Sadly this is not constantly the case and checking out this setting, either because the low beams of your Toyota Land Cruiser Serie 70 are not lighting up well, or because you have the sense that they are too weak or too strong is a good idea .
Adjusting the low beam of your Toyota Land Cruiser Serie 70 for safety is a good idea.
To start, the adjusting of the dipped headlights of an Toyota Land Cruiser Serie 70 must be done for a basic safety reason. Regardless it’s for you, or for the other users you encounter during your night trips. In reality, if you don’t see enough, the real danger is to fail to see an obstacle on the route, or to predict a curve badly. On the contrary, if your lights are too strong, you risk dazzling the car owners in front of you, and thus putting yourself at risk. It is subsequently necessary for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Toyota Land Cruiser Serie 70 for law motives
Additionally to safety, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another regulation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Toyota Land Cruiser Serie 70?
We will now move on to the part that concerns you the more in this article content, how to adjust the low beams of his Toyota Land Cruiser Serie 70? This setting may seem a bit complicated, but if you stick to the guidelines you should be able to do it without too much problem.
Preparations to set the low beam of a Toyota Land Cruiser Serie 70
First of all, you will need to prepare your vehicle to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your vehicle on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Toyota Land Cruiser Serie 70
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your vehicle up to a distance of between 7 and 10 metres. For the rest of the operation here are the guidelines to stick to:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Toyota Land Cruiser Serie 70 (they are in general marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, examine that the low beam setting of your Toyota Land Cruiser Serie 70 is consistent on the road, do not be reluctant to examine that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Toyota Land Cruiser Serie 70, please browse our article content on this subject.
If you wish more tutorials on the Toyota Land Cruiser Serie 70, go to our Toyota Land Cruiser Serie 70 category.
